Hydromagnetic squeeze film in rough porous narrow journal bearing: A study of slip effect

被引:1
|
作者
Shukla S. [1 ]
Deheri G. [2 ]
机构
[1] Department of Mathematics, Shri R.K.Parikh Arts and Science College Petlad, Dantali-Road At-Po: Petlad, 388450, Gujarat
[2] Department of Mathematics, Sardar Patel University, Vallabh Vidyanagar, 388120, Gujarat
关键词
Journal bearing; Load carrying capacity; Magnetic fluid; Porosity; Roughness; Slip velocity;
D O I
10.2474/trol.12.177
中图分类号
学科分类号
摘要
This article aims to study the influence of slip on a hydromagnetic squeeze film in transversely rough porous narrow journal bearing. The Neuringer-Rosensweig model governs the fluid flow. The slip model of the Beavers and Joseph has been used. The stochastic modeling of Christensen and Tonder has been adopted for calculating the effect of transverse surface roughness. The pressure distribution is obtained by solving the concerned stochastically averaged Reynolds type equation. It is observed that the adverse effect of roughness gets compounded due to slip effect. Equally is the crucial role of eccentricity for the performance of a bearing system. The results confirm that slip has to be at minimum for any improvement in the performance. Besides, the absence of flow does not deter the system from supporting a good amount of load which does not happen in the case of a traditional lubricant. © Japanese Society of Tribologists.
引用
收藏
页码:177 / 186
页数:9
相关论文
共 50 条
  • [21] A Comparison of Magnetic Fluid Flow Models on the Behavior of a Ferrofluid Squeeze Film in Curved Rough Porous Circular Plates Considering Slip Velocity
    Patel, Jimit R.
    Deheri, G. M.
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION A-SCIENCE, 2018, 42 (A4): : 2053 - 2061
  • [22] An Effect of a Porous Structure, Slip Velocity and Rosensweig's Viscosity on the Ferrofluid Based Squeeze Film in Porous Curved Annular Plates
    Patel, Niru C.
    Patel, Jimit R.
    Deheri, G. M.
    JOURNAL OF NANOFLUIDS, 2023, 12 (02) : 498 - 505
  • [23] A Comparison of Magnetic Fluid Flow Models on the Behavior of a Ferrofluid Squeeze Film in Curved Rough Porous Circular Plates Considering Slip Velocity
    Jimit R. Patel
    G. M. Deheri
    Iranian Journal of Science and Technology, Transactions A: Science, 2018, 42 : 2053 - 2061
  • [24] Static and dynamic behaviour of squeeze-film lubrication of narrow porous journal bearings with coupled stress fluid
    Naduvinamani, NB
    Hiremath, PS
    Gurubasavaraj, G
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2001, 215 (J1) : 45 - 62
  • [25] Jenkins Model Based Magnetic Squeeze Film In Curved Rough Circular Plates Considering Slip Velocity: A Comparison Of Shapes
    Patel, Jimit R.
    Deheri, G. M.
    FME TRANSACTIONS, 2015, 43 (02): : 144 - 153
  • [26] A STUDY OF FERROFLUID LUBRICATION BASED ROUGH SINE FILM SLIDER BEARING WITH ASSORTED POROUS STRUCTURE
    Munshi, Mohmmadraiyan M.
    Patel, Ashok R.
    Deheri, Gunamani B.
    ACTA POLYTECHNICA, 2019, 59 (02) : 144 - 152
  • [27] Combined effect of circumferential roughness and squeeze velocity on ferrofluid squeeze film with rotating sphere and rough plate
    Patel, Darshana A.
    Kataria, Ramesh C.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (24) : 11537 - 11548
  • [28] Theoretical Study of Shliomis Model Based Magnetic Squeeze Film in Rough Curved Annular Plates With Assorted Porous Structures
    Patel, Jimit R.
    Deheri, Gunamani
    FME TRANSACTIONS, 2014, 42 (01): : 56 - 66
  • [29] Theoretical analysis of effect of MHD, couple stress and slip velocity on squeeze film lubrication of rough Triangular plates
    R, Vinutha
    N, Hanumagowda B.
    R, Vasanth K.
    K, Ganesh Kumar
    International Journal of Thermofluids, 2024, 24
  • [30] Effect of Bearing Deformation on the Performance of a Magnetic Fluid-Based Infinitely Rough Short Porous Journal Bearing
    Shimpi, M. E.
    Deheri, G. M.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCES IN TRIBOLOGY AND ENGINEERING SYSTEMS (ICATES 2013), 2014, : 19 - 33