APPLICATION OF THREE-DIMENSIONAL PRESSURE-VELOCITY SENSOR TO SOUND FIELD OF MEASUREMENT FOR FLOOR IMPACT SOUND

被引：0

作者：

Tomiku R. ^{[1
,2
]}

Otsuru T. ^{[1
,2
]}

Okamoto N. ^{[1
,2
]}

Kimura T. ^{[2
]}

Kanazawa A. ^{[2
]}

机构：

[1] Dept. of Science and Technology, Faculty of Science and Technology, Oita Univ.

来源：

AIJ Journal of Technology and Design | 2023年 / 29卷 / 73期

关键词：

Calibration; Floor impact sound; Particle velocity; Sound intensity; Three-dimensional pressure-velocity sensor;

D O I：

10.3130/aijt.29.1367

中图分类号：

学科分类号：

摘要：

In this paper, investigations on the applicability of the 3D pressure-velocity sensor in the sound field for acoustic measurement of building are presented. First, a calibration method for the sensor using an acoustic tube is proposed. Next, the measured values from the sensors installed near field of the boundary in the sound field of the floor impact sound are compared with those from the vibration acceleration pickup installed on the boundary. Finally, measurement results of time response of 3D particle velocity and instantaneous sound intensity in the field in wooden and RC buildings are shown. © 2023 Architectural Institute of Japan. All rights reserved.

引用

页码：1367 / 1371

页数：4

共 13 条

[1]

de Bree H.E., Et al., The μ-flown: a novel device for measuring acoustic flows, Sensors and Actuators A: Physical, 54, pp. 552-557, (1996)

[2]

Takahashi Y., In Situ Measurements of Surface Impedance and Absorption Coefficients of Porous Materials Using Two Microphones and Ambient Noise, Appl. Acoust, 66, pp. 845-865, (2005)

[3]

Otsuru T., Ensemble Averaged Surface Normal Impedance of Material Using an In-Situ Technique: Preliminary Study Using Boundary Element Method, J. Acoust. Soc. Am, 125, pp. 3784-3791, (2009)

[4]

Kusno A., Et al., The effect of humidity on the stability of pressure-velocity sensors, AIJ Journal of Technology and Design, 19, 41, pp. 179-184, (2013)

[5]

Tomiku R., Et al., APPLICATION OF AN IN-SITU MEASUREMENT METHOD USING ENSEMBLE AVERAGING TECHNIQUE TO MATERIAL DEVELOPMENT, AIJ Journal of Technology and Design, 21, 47, pp. 167-170, (2015)

[6]

Okamoto N., Et al., DEVELOPMENT OF CONSTRUCTION CONDITION MANAGEMENT SYSTEM BY ABSORPTION CHARACTERISTICS MEASUEMENT OF BUILDING MATERIALS, AIJ Journal of Technology and Design, 23, 54, pp. 517-520, (2017)

[7]

Sakamoto N., Et al., Reproducibility of sound absorption and surface impedance of materials measured in a reverberation room using ensemble averaging technique with a pressure-velocity sensor and improved calibration, Appl.Acoust, 142, pp. 87-94, (2018)

[8]

Bi C.-X., Et al., Broadband acoustic holography from intensity measurements with a three-dimensional pressure-velocity probe, J. Acoust. Soc. Am, 138, pp. 2929-2936, (2015)

[9]

pp. 38-41, (1990)

[10]

Microflown technologies: sensors & probes USP REGULAR

← 1 2 →