Analysis of cutting forces at dry and near-dry turning of AISI 316L stainless steel

被引：0
|
作者：
Frățilă, Domnița [1 ]
Trif, Adrian [1 ]
Popan, Alexandru [1 ]
机构：
[1] Technical University of Cluj-Napoca, Bd. Muncii 103-1051, Cluj-Napoca,400641, Romania
来源：
Academic Journal of Manufacturing Engineering | 2018年 / 16卷 / 04期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：13 / 19
相关论文
共 50 条
  • [1] Influence of cutting speed on coated TiCN cutting tool during turning of AISI 316L stainless steel in dry turning process
    Zaharudin, A. M.
    Budin, S.
    1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505
  • [2] Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide tools
    Nur, Rusdi
    Noordin, M. Y.
    Izman, S.
    Kurniawan, D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2017, 231 (04) : 676 - 683
  • [3] Effects of cutting tool forms on the surface integrity in turning of AISI 316L stainless steel
    Gurbuz, Huseyin
    Seker, Ulvi
    Kafkas, Firat
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2020, 35 (01): : 225 - 240
  • [4] Development of a friction modelling method in dry cutting of AISI 316L austenitic stainless steels
    C. Bonnet
    F. Valiorgue
    J. Rech
    J. M. Bergheau
    P. Gilles
    C. Claudin
    International Journal of Material Forming, 2008, 1 : 1211 - 1214
  • [5] Development of a friction modelling method in dry cutting of AISI 316L austenitic stainless steels
    Bonnet, C.
    Valiorgue, F.
    Rech, J.
    Bergheau, J. M.
    Gilles, P.
    Claudin, C.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 1211 - 1214
  • [6] Improvement of the numerical modeling in orthogonal dry cutting of an AISI 316L stainless steel by the introduction of a new friction model
    Bonnet, C.
    Valiorgue, F.
    Rech, J.
    Hamdi, H.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2008, 1 (02) : 114 - 118
  • [7] Residual stresses in surface layer after dry and MQL turning of AISI 316L steel
    Leppert, Tadeusz
    Peng, Ru Lin
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2012, 6 (4-5): : 367 - 374
  • [8] Residual stresses in surface layer after dry and MQL turning of AISI 316L steel
    Tadeusz Leppert
    Ru Lin Peng
    Production Engineering, 2012, 6 (4-5) : 367 - 374
  • [9] Dry turning optimization of austenitic stainless steel 316L based on Taguchi and TOPSIS approaches
    Touggui, Youssef
    Belhadi, Salim
    Mabrouki, Tarek
    Temmar, Mustapha
    Yallese, Mohamed Athmane
    MATERIAUX & TECHNIQUES, 2020, 108 (04):
  • [10] On the diffusion wear of cemented carbides in the turning of AISI 316L stainless steel
    Saketi, S.
    Bexell, U.
    Ostby, J.
    Olsson, M.
    WEAR, 2019, 430 : 202 - 213
12345