Evaluation of friction properties in polished polycrystalline diamond films on steel substrates

被引：0
|
作者：
Tsutsui A. [1 ]
Miki H. [1 ]
Takeno T. [1 ]
Takagi T. [1 ]
机构：
[1] Institute of Fluid Science, Tohoku University, Aoba-ku, Sendai-shi, Miyagi, 980-8577
来源：
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C | 2010年 / 76卷 / 766期
关键词：
Diamond film; Friction; Interlayer; Stainless steel;
D O I：
10.1299/kikaic.76.1639
中图分类号：
学科分类号：
摘要：
CVD diamond films are expected to become a solid lubricant coating without any maintenance. However, substrates on which diamond film can be deposited are limited to silicon, tungsten carbides (TiC) and so forth. If diamond films can be deposited onto steel substrates, possible applications will increase in number. In this study, diamond film was deposited on a steel substrate with an interlayer and was partly polished. Tungsten and titanium were selected as materials for an interlayer between the diamond film and the SUS 440 C substrate. In a friction test, low and stable friction coefficients were obtained between the pair of diamond film and SKD 11 pin, with a friction coefficient of 0.1 in the steady-state regime. The diamond films on steel substrates show good friction properties similar to conventional diamond films on TiC substrates. Therefore, diamond films on steel substrates prove useful in obtaining solid lubrication films for sliders.
引用
收藏
页码：1639 / 1644
页数：5
相关论文
共 50 条
  • [21] Mechanical properties evaluation of diamond films via nanoindentation
    Xiong, Jiaji
    Liu, Lusheng
    Song, Haozhe
    Wang, Mengrui
    Hu, Tianwen
    Zhai, Zhaofeng
    Yang, Bing
    Jiang, Xin
    Huang, Nan
    DIAMOND AND RELATED MATERIALS, 2022, 130
  • [22] The Wear and Friction Characters of Polycrystalline Diamond Under Wetting Conditions
    Liu, Chun
    Man, Zhongyi
    Zhou, Fubao
    Chen, Kai
    Yu, Haiyang
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (02):
  • [23] Friction behaviour of diamond-like carbon films with varying mechanical properties
    Singh, R. Arvind
    Yoon, Eui-Sung
    Kim, Hong Joon
    Kong, Hosung
    Park, Se-Jun
    Lee, Kwang-Ryeol
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07) : 4348 - 4351
  • [24] INTERPRETATION OF FRICTION AND WEAR PROPERTIES OF MOS2 COATED STEEL SUBSTRATES
    CUNNINGHAM, JM
    FORD, IJ
    OGILVY, JA
    ROBERTS, EW
    WEAR, 1994, 177 (01) : 93 - 101
  • [25] Friction and wear of diamond and diamond-like carbon films
    Erdemir, A
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2002, 216 (J6) : 387 - 400
  • [26] Structural investigations of protective polycrystalline diamond coatings on titanium substrates
    Kulesza, S.
    Patyk, J. K.
    Daenen, M.
    William, O. A.
    Van de Putte, W.
    Fransaer, J.
    Haenen, K.
    Nesladek, M.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2) : 203 - 207
  • [27] Flexible diamond-like carbon films on rubber: Friction and the effect of viscoelastic deformation of rubber substrates
    Pei, Y. T.
    Martinez-Martinez, D.
    van der Pal, J. P.
    Bui, X. L.
    Zhou, X. B.
    De Hosson, J. Th. M.
    ACTA MATERIALIA, 2012, 60 (20) : 7216 - 7225
  • [28] Tribological properties of TiN/diamond and TiAlN/diamond bilayer films sliding against carbon steel
    Lei, Xuelin
    He, Yun
    Sun, Fanghong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2018, 232 (08) : 1014 - 1024
  • [29] Seeding diamond nanocrystals on Si substrates for deposition of diamond films
    Jiang, N
    Nishimura, K
    Shintani, Y
    Hiraki, A
    IEICE TRANSACTIONS ON ELECTRONICS, 2003, E86C (05) : 811 - 815
  • [30] Diamond Deposition on Iron and Steel Substrates: A Review
    Li, Xiaoju
    He, Lianlon
    Li, Yuanshi
    Yang, Qiaoqin
    MICROMACHINES, 2020, 11 (08)
12345