Microstructure and mechanical properties of welding joints of Fe-6.5%Si alloy hot bands

被引：0

作者：

Liu J.-L. ^{[1
]}

Sha Y.-H. ^{[1
]}

Wen X.-X. ^{[1
]}

Zuo L. ^{[1
]}

机构：

[1] Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2016年 / 37卷 / 01期

关键词：

Fe-6.5%Si; Microstructure; MIG; Properties; Weld;

D O I：

10.3969/j.issn.1005-3026.2016.01.009

中图分类号：

学科分类号：

摘要：

To solve the problem that welding joint is easy to crack in hot bands of Fe-6.5%Si alloy, the effect of argon arc welding process on the microstructure and mechanical properties of joints was investigated. The results showed that TIG welding without filler wire is not suitable for the welding of Fe-6.5%Si alloy hot bands because it produces a large number of cracks in the weld. While MIG welding using the electrodes made of industrial pure iron successfully connects the hot bands. The weld is continuous in the surface, the fish-scale pattern is uniform and no micro-cracks are in the weld. The optimization of microstructure and plasticity can be attributed to the dilution of silicon concentration in the weld zone. After the optimization of welding process, the tensile elongation and the ultimate tensile strength of the joint are 5.5% and 280 MPa, respectively, which can meet the requirement of warm rolling process of Fe-6.5%Si alloy. © 2016, Editorial Department of Journal of Northeastern University. All right reserved.

引用

页码：39 / 43

页数：4

共 9 条

[1]

Fu H.D., Zhang Z.H., Wu X.S., Et al., Effects of boron on microstructure and mechanical properties of Fe-6.5 wt%Si alloy fabricated by directional solidification, Intermetallics, 35, pp. 67-72, (2013)

[2]

Liu J.L., Sha Y.H., Zhang F., Et al., Development of {210}<001> recrystallization texture in Fe-6.5wt%Si thin sheets, Scripta Materialia, 65, pp. 292-295, (2011)

[3]

Tian W.-Y., Yu J., Zhang Y.-L., Microstructure and brittle of weld heat affected zone of 3.25% silicon steel, Transaction of the China Welding Institution, 1, pp. 50-54, (1984)

[4]

Ruiz D., Yanez T.R., Cuello G.J., Et al., Order in Fe-Si alloys: a neutron diffraction study, Physica B: Condensed Matter, 385, 1, pp. 578-580, (2006)

[5]

Miyazaki Y., Iwami H., Obara M., Et al., Welding method for high silicon electromagnetic steel sheets

[6]

He C.-S., Wang D., Zhao G., Et al., Microstructure and mechanical properties of Al-12.7Si-0.7 Mg alloy joints welded by AC TIG welding, Journal of Northeastern University(Natural Science), 32, 10, pp. 1431-1434, (2011)

[7]

Kim K.N., Pan L.M., Lin J.P., Et al., The effect of boron content on the processing for Fe-6.5wt% Si electrical steel sheets, Journal of Magnetism and Magnetic Materials, 277, 3, pp. 331-336, (2004)

[8]

Ros-Yanez T., Ruiz D., Barros J., Et al., Study of deformation and aging behaviour of iron-silicon alloys, Materials Science and Engineering A, 447, 1-2, pp. 27-34, (2007)

[9]

Wang C., Lin D.-L., Shan A.-D., Et al., Mechanical behavior and deformation mechanism of annealed hot-rolled Fe-6.5%Si alloy, Journal of Shanghai Jiaotong Univertity, 36, 5, pp. 601-603, (2002)

← 1 →