Analysis of the mechanism of longitudinal bending deformation due to welding in a steel plate by using a numerical model

被引：0
作者：
Kim Y.R. [1 ]
Yan J. [1 ]
Song G.Y. [2 ]
Kim J.-W. [1 ]
机构：
[1] School of Mechanical Engineering, Yeungnam Univ.
来源：
Transactions of the Korean Society of Mechanical Engineers, A | 2017年 / 41卷 / 01期
关键词：
Finite Element Analysis; Longitudinal Bending; Welding Deformation;
D O I：
10.3795/KSME-A.2017.41.1.049
中图分类号：
学科分类号：
摘要：
Welding deformation is a permanent deformation that is caused in structures by welding heat. Welding distortion is the primary cause of reduced productivity, due to welded structural strength degradation, low dimensional accuracy, and appearance. As a result, research and numerous experiments are being carried out to control welding deformation. The aim of this study is to analyze the mechanism of longitudinal bending deformation due to welding. Welding experiments and numerical analyses were performed for this study. The welding experiments were performed on 4 mm and 8.5 mm thickness steel plates, and the numerical analysis was conducted on the welding deformation using the FE software MSC.marc. © 2017 The Korean Society of Mechanical Engineers.
引用
收藏
页码：49 / 55
页数：6
相关论文
共 50 条
[41]   Comparison of welding residual stress and deformation induced by local vacuum electron beam welding and metal active gas arc welding in a stainless steel thick-plate joint [J].
Feng, Guangjie ;
Wang, Yifeng ;
Luo, Wenze ;
Hu, Long ;
Deng, Dean .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 13 :1967-1979
[42]   Numerical analysis of welding deformation and residual stress in marine propeller nozzle with hybrid laser-arc girth welds [J].
Rong, Youmin ;
Chang, Yong ;
Xu, Jiajun ;
Huang, Yu ;
Lei, Ting ;
Wang, Chunming .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2017, 158 :51-58
[43]   Numerical Analysis of RC beam with High Strength Steel Reinforcement using CDP model [J].
Rewers, Iga .
3RD WORLD MULTIDISCIPLINARY CIVIL ENGINEERING, ARCHITECTURE, URBAN PLANNING SYMPOSIUM (WMCAUS 2018), 2019, 471
[44]   Experimental and numerical investigation of a gouging heat source model and gouging/welding residual stress and deformation [J].
Huang, Hui ;
Ma, Ninshu ;
Rashed, Sherif ;
Narasaki, Kunio ;
Kado, Kazuma ;
Agano, Yasuo ;
Tanaka, Nobuya ;
Mao, Wengang .
JOURNAL OF MANUFACTURING PROCESSES, 2024, 110 :101-113
[45]   Numerical Analysis of Pattern Shape Deformation in UV Imprint Due to Curing Shrinkage [J].
Onishi, Yuki ;
Yamashita, Ryunosuke ;
Amaya, Kenji ;
Hirai, Yoshihiko .
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2020, 33 (02) :245-250
[46]   Monitoring Estimation and Finite Element Analysis of Thick Plate Steel Beam Joints Welding Process [J].
Wang X. ;
Liu H. ;
Zhou T. ;
Tong X. .
Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2018, 51 :27-34
[47]   NUMERICAL ANALYSIS OF INELASTIC DEFORMATION OF DOUBLY SYMMETRIC STAINLESS STEEL FLEXURAL MEMBERS [J].
Gao, Bo ;
Wang, Yuan-Qing ;
Dai, Guo-Xin ;
Shi, Yong-Jiu ;
Yuan, Huan-Xin .
PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOL I AND II, 2010, :793-797
[48]   Finite Element Analysis of Residual Welding Stresses and Deformation for a 5A06 Aluminum Alloy Plate [J].
N. C. Lü ;
M. H. Wang ;
G. D. Hao ;
Y. T. Wang .
Strength of Materials, 2020, 52 :532-538
[49]   Finite Element Analysis of Residual Welding Stresses and Deformation for a 5A06 Aluminum Alloy Plate [J].
Lu, N. C. ;
Wang, M. H. ;
Hao, G. D. ;
Wang, Y. T. .
STRENGTH OF MATERIALS, 2020, 52 (04) :532-538
[50]   Numerical investigation of welding deformation diminution for double shell structure using the layered inherent strain [J].
Li, Cheng ;
Zhai, Hua ;
Zhu, Lianwei ;
Liu, Zhihong ;
Ma, Jianguo ;
Zhu, Xiaofeng ;
Liu, Qiong .
NUCLEAR ENGINEERING AND TECHNOLOGY, 2025, 57 (02)
12345