Analysis of the mechanism of longitudinal bending deformation due to welding in a steel plate by using a numerical model

被引：0
作者：
Kim Y.R. [1 ]
Yan J. [1 ]
Song G.Y. [2 ]
Kim J.-W. [1 ]
机构：
[1] School of Mechanical Engineering, Yeungnam Univ.
来源：
Transactions of the Korean Society of Mechanical Engineers, A | 2017年 / 41卷 / 01期
关键词：
Finite Element Analysis; Longitudinal Bending; Welding Deformation;
D O I：
10.3795/KSME-A.2017.41.1.049
中图分类号：
学科分类号：
摘要：
Welding deformation is a permanent deformation that is caused in structures by welding heat. Welding distortion is the primary cause of reduced productivity, due to welded structural strength degradation, low dimensional accuracy, and appearance. As a result, research and numerous experiments are being carried out to control welding deformation. The aim of this study is to analyze the mechanism of longitudinal bending deformation due to welding. Welding experiments and numerical analyses were performed for this study. The welding experiments were performed on 4 mm and 8.5 mm thickness steel plates, and the numerical analysis was conducted on the welding deformation using the FE software MSC.marc. © 2017 The Korean Society of Mechanical Engineers.
引用
收藏
页码：49 / 55
页数：6
相关论文
共 50 条
[31]   Residual Stress and Deformation of Bogie Frame Steel Plate Weldment By Plasma-MAG Hybrid Welding Process [J].
Wu, Xiangyang ;
Zhang, Zhiyi ;
Qi, Weichuang ;
Tian, Renyong .
PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS, 2015, 21 :712-716
[32]   Development of a Finite Element Model for the HAZ Temperature Field in Longitudinal Welding of Pipeline Steel [J].
Wang, Zhixing ;
Shang, Chengjia ;
Wang, Xuelin .
METALS, 2025, 15 (01)
[33]   Comparison of welding deformation and residual stress in Q345 steel thin-plate joints induced by laser beam welding and gas metal arc welding [J].
Mao Z. ;
Pu X. ;
Wang W. ;
Ye Y. ;
Deng D. .
Zhongguo Jiguang/Chinese Journal of Lasers, 2016, 43 (06)
[34]   Analysis of the Deformation Process in Ni3(Al, Fe) Intermetallic under Longitudinal Bending [J].
N. V. Kazantseva ;
D. I. Davydov ;
I. V. Ezhov ;
D. A. Shishkin ;
N. I. Vinogradova ;
P. B. Terent’ev .
Physics of Metals and Metallography, 2018, 119 :26-34
[35]   Analysis of the Deformation Process in Ni3(Al, Fe) Intermetallic under Longitudinal Bending [J].
Kazantseva, N. V. ;
Davydov, D. I. ;
Ezhov, I. V. ;
Shishkin, D. A. ;
Vinogradova, N. I. ;
Terent'ev, P. B. .
PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (01) :26-34
[36]   Mesh Generation Method for Welding Deformation Analysis based on Lightweight Model [J].
Park, Jung-Goo ;
Choi, Doo-Jin ;
Kwon, Ki-Youn .
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2022, 46 (05) :451-459
[37]   Mesh Generation Method for Welding Deformation Analysis based on Lightweight Model [J].
Park J.G. ;
Choi D.J. ;
Kwon K.Y. .
Transactions of the Korean Institute of Electrical Engineers, 2022, 71 (05) :451-459
[38]   Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow gap [J].
Serizawa, Hisashi ;
Nakamura, Shinichiro ;
Kanbe, Kyosuke ;
Fujita, Yoshihiro ;
Asai, Satoru ;
Murakawa, Hidekazu .
WELDING IN THE WORLD, 2013, 57 (05) :615-623
[39]   Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow gap [J].
Hisashi Serizawa ;
Shinichiro Nakamura ;
Kyosuke Kanbe ;
Yoshihiro Fujita ;
Satoru Asai ;
Hidekazu Murakawa .
Welding in the World, 2013, 57 :615-623
[40]   Numerical simulation of multi-layer rotating arc narrow gap MAG welding for medium steel plate [J].
Li, Wenhang ;
Yu, Rui ;
Huang, Dacheng ;
Wu, Jing ;
Wang, Yirong ;
Hu, Ting ;
Wang, Jiayou .
JOURNAL OF MANUFACTURING PROCESSES, 2019, 45 :460-471
12345