Analysis of the mechanism of longitudinal bending deformation due to welding in a steel plate by using a numerical model

被引：0
作者：
Kim Y.R. [1 ]
Yan J. [1 ]
Song G.Y. [2 ]
Kim J.-W. [1 ]
机构：
[1] School of Mechanical Engineering, Yeungnam Univ.
来源：
Transactions of the Korean Society of Mechanical Engineers, A | 2017年 / 41卷 / 01期
关键词：
Finite Element Analysis; Longitudinal Bending; Welding Deformation;
D O I：
10.3795/KSME-A.2017.41.1.049
中图分类号：
学科分类号：
摘要：
Welding deformation is a permanent deformation that is caused in structures by welding heat. Welding distortion is the primary cause of reduced productivity, due to welded structural strength degradation, low dimensional accuracy, and appearance. As a result, research and numerous experiments are being carried out to control welding deformation. The aim of this study is to analyze the mechanism of longitudinal bending deformation due to welding. Welding experiments and numerical analyses were performed for this study. The welding experiments were performed on 4 mm and 8.5 mm thickness steel plates, and the numerical analysis was conducted on the welding deformation using the FE software MSC.marc. © 2017 The Korean Society of Mechanical Engineers.
引用
收藏
页码：49 / 55
页数：6
相关论文
共 50 条
[21]   Numerical Analysis of Electron Beam Welding Deformation for the Vacuum Vessel Lower Port Stub of 316L Stainless Steel [J].
Ji, Haibiao ;
Tao, Jia ;
Wu, Jiefeng ;
Liu, Zhihong ;
Ma, Jianguo ;
Xia, Xiaowei ;
Lin, Xiaodong ;
Gao, Xiang .
METALS, 2022, 12 (02)
[22]   Welding deformation analysis of aluminum alloy and steel sheet metal parts based on resistance spot welding [J].
Xing, Yanfeng ;
Wang, Fang ;
Lu, Jingjing ;
Xu, Sha .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (03) :797-806
[23]   Numerical Optimization of the Welding Sequence for Mitigating Welding Deformation in Aluminum Pipe Structures by Using a Genetic Algorithm [J].
Minwook Choi ;
Chunbiao Wu ;
Jae-Woong Kim .
International Journal of Precision Engineering and Manufacturing, 2020, 21 :2323-2333
[24]   Numerical Optimization of the Welding Sequence for Mitigating Welding Deformation in Aluminum Pipe Structures by Using a Genetic Algorithm [J].
Choi, Minwook ;
Wu, Chunbiao ;
Kim, Jae-Woong .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2020, 21 (12) :2323-2333
[25]   Heat deformation analysis using a finite element model on gas pressure welding for railway rail [J].
Itoh H. ;
Yamamoto R.-I. ;
Sasaki T. .
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2022, 40 (01) :44-55
[26]   Effects of Welding Sequence on Welding Deformation of Steel Q345D Based on Numerical Simulation with PAM-ASSEMBLY [J].
Chen, Xueyong ;
Xiao, Yifeng ;
Li, Yi ;
Li, Xiangwen .
PROCEEDINGS OF THE 2014 INTERNATIONAL CONFERENCE ON MECHATRONICS, CONTROL AND ELECTRONIC ENGINEERING, 2014, 113 :631-634
[27]   Formation Mechanism and Control Method of Wave Deformation of Ultra-thin Plate Caused by Laser Welding [J].
Zhang J. ;
Xiang Z. ;
Wang X. ;
Lei Y. ;
Lin J. .
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (04) :72-79
[28]   Deformation Analysis and Fracture Mechanism of Steel Casing in Oil Wells [J].
Zhu, Qingjie ;
Chen, Jing .
MATERIALS SCIENCE AND MECHANICAL ENGINEERING, 2014, 467 :317-+
[29]   EXPERIMENTAL STUDY ON LONGITUDINAL NEGATIVE BENDING PERFORMANCE OF FLAT STEEL PLATE-UHPC COMPOSITE BRIDGE DECK [J].
Li C.-X. ;
Xiao H.-Y. ;
He L.-F. ;
Shi Y. ;
Feng H.-X. ;
Pei B.-D. .
Gongcheng Lixue/Engineering Mechanics, 2024, (03) :91-105
[30]   On Simulation Analysis of Plate Forming and Deformation Compensation Technology of the side roll for Four-roll Plate Bending Machine [J].
Wu, Kai ;
Sun, Yu ;
Cao, Chunping ;
Zhou, Chi ;
Liu, Qingyin ;
Chang, Xin .
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 :1629-1634
12345