The analysis of the defects on the surface of galvanized steel structures

被引：0
作者：
Wang L. [1 ]
Zhou L. [1 ]
机构：
[1] School of Mechanical and Electrical Engineering, Chizhou University, Anhui, Chizhou
来源：
| 1600年 / Scientific and Technological Corporation卷 / 24期
关键词：
Alloy treatment; Defec; EPMA; Hot dip galvanization; SEM;
D O I：
10.15407/fm24.02.261
中图分类号：
学科分类号：
摘要：
Some black spots were found on the surface GA products, which could not meet the requirements of production of outside panel of automobile. The cause of the defects was investigated. Methods of their elimination are suggested. © 2017 - STC Institute for Single Crystals"."
引用
收藏
页码：261 / 263
页数：2
相关论文
共 9 条
[1]  
Zhu L., Angang Techn, 36, (1999)
[2]  
Zhang Q.F., Liu B.J., Steel Roll, 19, 33, (2002)
[3]  
Isobe M.T., Metal Finishing, 96, 5, (1998)
[4]  
Marder A.R., Prog. Mater. Sci, 45, (2000)
[5]  
Li J., Yan Y.H., Guo X.H., Et al., Adv. Mat. Res, 314-316, (2011)
[6]  
He Y., Liu X., Guan C., Et al., Int. Conf. Zinc and Zinc Alloy Coated Steel Sheet, (2013)
[7]  
Xu Y., Process Research to Direct Hot Dip 55%AI-Zn Process for Hot Rolled Pickling Strip[C], 9th international conference on zinc and zinc alloy coated steel sheet 2nd asi a-pacific galvanizing conference, (2013)
[8]  
Yang H., Zhang S., Li J., Et al., Surf. Coat. Techn, 240, 3, (2013)
[9]  
Longwei M.A., Chen H. Comp. Aided Eng, (2016)
1