Effects of axle box lateral clearance and friction coefficient on dynamic stability and wear of 3-piece bogies

被引：0

作者：

Rezvani, M.A. ^{[1
]}

Mazraeh, Amin ^{[1
]}

机构：

[1] School of Railway Engineering, University of Science and Technology, Tehran

来源：

International Journal of Vehicle Structures and Systems | 2013年 / 5卷 / 02期

关键词：

Coefficient of friction; Dynamic stability; Lateral clearance; Three piece bogie 18100; Wheel-rail contact;

D O I：

10.4273/ijvss.5.2.03

中图分类号：

学科分类号：

摘要：

Three piece bogies are commonly used in worldwide as freight wagons. Manufacturing and maintaining expenses are noticeably less than other types of freight wagons. Therefore many investigators have focused on optimization of these bogies in order to improve their performance. These bogies have been reported to have bad performance both in curved and straight pads. High number of wear in both contact points has been observed. In this investigation, a freight wagon equipped with a pair of three piece bogies is simulated in Universal Mechanism software to observe its hunting and wear behaviour. Parameters of lateral clearance and coefficient of friction are investigated to see their effects on vehicle behaviour. The results show that as the lateral clearance or coefficient of friction increase, the nonlinear critical speed would decrease and this would lead to encounter different nonlinear critical speeds for rear and front bogies. The lateral clearance has little effects on decreasing friction work in both contact points in transient section of curves due to the considered wheel-rail profiles. © 2013. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：58 / 62

页数：4

共 18 条

[1]

Polach O., On non-linear methods of bogie stability assessment using computer simulations, IMechE, Part F, J. Rail and Rapid Transit, 220, pp. 13-27, (2006)

[2]

Shevstov I.Y., Wheel/Rail Interface Optimisation, (2006)

[3]

Mazilu T., An analysis of bogie hunting instability, U.P.B. Sci. Bulletin, Series D, 71, 2, pp. 63-78, (2009)

[4]

Lewis R., Olofsson U., Wheel-Rail Interface Handbook, (2009)

[5]

Wickens A.H., Fundamental of Rail Vehicle Dynamics Guidance and Stability, (2003)

[6]

Iwnicki S., Handbook of Railway Vehicle Dynamics, (2001)

[7]

Shabana A.A., Zaazaa K.E., Sugiyama H., Railroad Vehicle Dynamics a Computational Approach, (2008)

[8]

Mazilu T., Dumitriu M., On the instability of railway vehicles, Fiability & Durability, 2, 8, pp. 1-8, (2011)

[9]

Zakharov S., Zharov I., Simulation of mutual wheel/rail wears, Wear, 253, pp. 100-106, (2002)

[10]

Zobory I., Prediction of wheel/rail profile wear, Vehicle System Dynamics, 28, pp. 221-259, (1997)

← 1 2 →