Microstructure and mechanical properties of high-pressure sintered Al 2O3/SiC nanocomposites

被引：0
|
作者：
Teng, Yuancheng [1 ]
Sun, Zhiping [2 ]
Zhang, Kuibao [1 ]
Lu, Weiyuan [3 ]
机构：
[1] Teng, Yuancheng
[2] Sun, Zhiping
[3] Zhang, Kuibao
[4] Lu, Weiyuan
来源：
Teng, Y. (tyc239@163.com) | 1600年 / Elsevier Ltd卷 / 578期
关键词：
Al2O3/SiC nanocomposites were synthesized by high-pressure sintering using α-Al2O3 and β-SiC nanopowders as the raw materials. Microstructure and mechanical properties of the sintered samples were investigated using X-ray diffraction (XRD); Scanning Electron Microscope (SEM); Atomic Force Microscope (AFM) et al. The results indicate that high-pressure sintering is an effective sintering technique; which can densify Al2O3/SiC nanocomposites at high pressure (4.5 GPa) and relatively low temperature (1000-1230 °C). Rapid grain growth of Al2O3 is mainly restrained by the separation effect of nanosized SiC grains. Grain boundary; grain boundary-intragranular and nano-nano structured Al 2O3/SiC nanocomposites can be achieved by controlling the sintering temperature and β-SiC content. The highly densified Al 2O3/SiC nanocomposite (AS5-1170) exhibits excellent mechanical properties as 429.9 GPa in elastic modulus and 30.7 GPa in nano-hardness. © 2013 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：67 / 71
相关论文
共 50 条
  • [31] Mechanical properties and microstructure of an Al2O3-SiC-TiC composite
    Smirnov, BI
    Nikolaev, VI
    Orlova, TS
    Shpeizman, VV
    de Arellano-Lopez, AR
    Goretta, KC
    Singh, D
    Routbort, JL
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 242 (1-2): : 292 - 295
  • [32] Characterization of microstructural and mechanical properties of hybrid Al/SiC/Al2O3 nanocomposites
    Matli, Penchal Reddy
    Manohar, Guttikonda
    Abdelatty, Rokaya
    Shakoor, Rana Abdul
    Azeem, Abdul
    Lingala, Siva Sankara Reddy
    Kotalo, Rama Gopal
    Mohamed, A. M. A.
    EMERGENT MATERIALS, 2024, 7 (03) : 1253 - 1261
  • [33] Mechanical properties and microstructure of an Al2O3-SiC-TiC composite
    Smirnov, B.I.
    Nikolaev, V.I.
    Orlova, T.S.
    Shpeizman, V.V.
    de Arellano-Lopez, A.R.
    Goretta, K.C.
    Singh, D.
    Routbort, J.L.
    Materials Science and Engineering A, 1998, A242 (1-2): : 292 - 295
  • [34] Microstructure and mechanical properties of spark plasma sintered ZrO2-Al2O3-TiC0.5N0.5 nanocomposites
    Vanmeensel, K
    Sastry, KY
    Hennicke, J
    Anné, G
    Jiang, D
    Laptev, A
    Vleugels, J
    Van der Biest, O
    FROM NANOPOWDERS TO FUNCTIONAL MATERIALS, 2005, 106 : 153 - 160
  • [35] Microstructure and High-Temperature Mechanical Properties of ZrO2-Al2O3-SiC Ceramics
    Zhang, Xiu-Ping
    Ouyang, Jia-Hu
    Wang, Yu-Jin
    Liu, Zhan-Guo
    Wang, Ya-Ming
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (09) : 3615 - 3621
  • [36] Microstructure and High-Temperature Mechanical Properties of ZrO2-Al2O3-SiC Ceramics
    Xiu-Ping Zhang
    Jia-Hu Ouyang
    Yu-Jin Wang
    Zhan-Guo Liu
    Ya-Ming Wang
    Journal of Materials Engineering and Performance, 2015, 24 : 3615 - 3621
  • [37] Mechanical properties of gas pressure sintered Si3N4/SiC nanocomposites
    Rendtel, P
    Rendtel, A
    Hübner, H
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (12) : 2061 - 2070
  • [38] Microstructure and mechanical properties of Al-assisted sintered Fe/Al2O3 cermets
    Schicker, S
    Erny, T
    García, DE
    Janssen, R
    Claussen, N
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1999, 19 (13-14) : 2455 - 2463
  • [39] Production of Al/Al2O3 Nanocomposites through Consolidation by High-Pressure Torsion
    Ashida, Maki
    Horita, Zenji
    Kita, Takuji
    Kato, Akira
    MATERIALS TRANSACTIONS, 2012, 53 (01) : 13 - 16
  • [40] Mechanical properties and microstructure of Al2O3-Ti3SiC2 ceramic composites
    Pan, W
    Wang, RG
    Luo, Y
    Qi, L
    Miao, H
    EURO CERAMICS VIII, PTS 1-3, 2004, 264-268 : 1029 - 1034
12345