Effect of Mean Torsional Stress on Very High Cycle Torsional Fatigue Strength of High Strength Steel

被引：0

作者：

Shimamura Y. ^{[1
]}

Hayashi Y. ^{[2
]}

Kinefuchi M. ^{[3
]}

Tanegashima R. ^{[4
]}

Sugitani K. ^{[3
]}

Sandaiji Y. ^{[3
]}

Fujii T. ^{[1
]}

Kikuchi S. ^{[1
]}

Tohgo K. ^{[1
]}

机构：

[1] Dept. Mechanical Engineering, Shizuoka University, Naka-ku, Hamamatsu

[2] Kobe Steel, Ltd., Kanazawa-cho, Kakogawa

[3] Kobe Steel, Ltd., Nishi-ku, Kobe

[4] Kobelco Research Institute, Inc., Nishi-ku, Kobe

来源：

Zairyo/Journal of the Society of Materials Science, Japan | 2022年 / 71卷 / 12期

关键词：

High strength steel; Mean torsional stress; Torsional fatigue; Ultrasonic fatigue testing; Very high cycle fatigue;

D O I：

10.2472/JSMS.71.976

中图分类号：

学科分类号：

摘要：

Mean torsional stress is considered to less affect torsional fatigue strength of steels, but several experimental results have been recently reported that mean torsional stress caused significant reduction in torsional fatigue strength in the very high cycle region for shot-peened spring steel. To investigate the effect of mean torsional stress on high strength steel, ultrasonic torsional fatigue tests with mean torsional stress were conducted for spring steel and bearing steel, which are used for mechanical components subjected to cyclic shear stress. Torsional fatigue strength up to 109 cycles were obtained for fully reversed torsional loading (□ = −1) to pulsating torsional loading (□ = 0). The results revealed that mean torsional stress caused reduction in fatigue strength in the very high cycle region for both spring steel and bearing steel, and applying higher mean shear stress would result in transition of the fracture origin from surface to an internal inclusion. The reduction in torsional fatigue strength was discussed from the viewpoint of the transition of fatigue origin, and applicability of a √□□□□ parameter model was discussed for predicting the reduction in torsional fatigue strength. 2022 The Society of Materials Science, Japan.

引用

页码：976 / 982

页数：6

共 13 条

[1]

Hirou sekkei binran, (1995)

[2]

Mayer H., Schuller R., Karr U., Fitzka M., Irrasch D., Hahn M., Bacher-Hochst M., Cyclic torsion very high cycle fatigue of VDSiCr spring steel at different load ratios, International Journal of Fatigue, 70, pp. 322-329, (2015)

[3]

Mayer H., Schuller R., Karr U., Irrasch D., Fitzka M., Hahn M., Bacher-Hochst M., Mean stress sensitivity and crack initiation mechanisms of spring steel for torsional and axial VHCF loading, International Journal of Fatigue, 93, pp. 309-317, (2016)

[4]

Karr U., Schonebauer B., Fitzuka M., Tamura E., Sandaiji Y., Murakami S., Mayer H., Inclusion initiated fracture under cyclic torsion very high cycle fatigue at different loading ratios, International Journal of Fatigue, 122, pp. 199-207, (2019)

[5]

Karr U., Schonebauer B., Sandaiji Y., Mayer H., Influence of load ratio on torsion very high cycle fatigue of high-strength spring streel in the presence of detrimental defects, Fatigue & Fracture of Engineering Materials & Structures, pp. 1-16, (2021)

[6]

Ultrasonic engineering, pp. 106-107, (1993)

[7]

Method for ultrasonic fatigue testing in metallic material, pp. 15-16, (2022)

[8]

Fujiwara M., Shimamura Y., Ishii H., Tohgo K., Fujii T., Development of ultrasonic torsional fatigue testing machine with mean torsional stress, The Proceedings of the Materials and Mechanics Conference, pp. 7-9, (2017)

[9]

Sandaiji Y., Tamura E., Tsuchida T., Influence of inclusion type on internal fatigue fracture under cyclic shear stress, Procedia Materials Science, 3, pp. 894-899, (2014)

[10]

Sandaiji Y., Influence of loading type on fracture behavior of high strength steel under very high cycle fatigue, Kobe Steel Engineering Reports, 66, 2, pp. 48-51, (2017)

← 1 2 →