Functional finishing of viscose knitted fabrics via graphene coating

被引:0
作者
Wu W. [1 ,2 ,3 ]
Zhang H. [1 ,2 ,3 ]
Ma H. [1 ,2 ,3 ]
Cao J. [1 ,2 ,3 ]
Jiang L. [2 ]
Chen G. [2 ,3 ]
机构
[1] Australia Institute for Advanced Materials and Manufacturing, Jiaxing University, Jiaxing, Zhejiang
[2] College of Material and Textile Engineering, Jiaxing University, Jiaxing, Zhejiang
[3] Jiaxing University, No. 56 North Yuexiu Road, Jiaxing, 314001, Zhejiang
来源
Chen, Guanglin (chenguanglin644@163.com) | 1600年 / Association Nonwoven Fabrics Industry卷 / 12期
关键词
Anti-ultraviolet; Conductive properties; Graphene; Hydrophobic property; Viscose knitted fabrics;
D O I
10.1177/155892501701200301
中图分类号
学科分类号
摘要
Functional finishing of viscose knitted fabrics was realized through layer-by-layer assembly with graphene oxide and reduction treatment of hydrazine hydrate. Due to the introduction of graphene, viscose fabrics became conductive, and exhibited enhanced anti-ultraviolet properties and hydrophobicity. Scanning electron microscopy results demonstrated that graphene could form thin films on the surface of viscose fibers, and with an increase in dipping-drying cycles, partial peeling of the thin films was observed. Electrical resistivity tests indicated that the volume resistance could reach to 128 Ω·cm and 96 Ω·cm when the courses and wales of the viscose fabrics treated for thirty dipping-drying cycles. In addition, ultraviolet protection factor of the viscose fabrics was 100+ and the water contact angle of the viscose fabrics treated for twelve cycles was 125o compared with 18o for the original fabrics. These multifunctional fabrics have potential applications in conductive devices, water treatment systems and smart textiles. © 2017, Association Nonwoven Fabrics Industry. All rights reserved.
引用
收藏
页码:1 / 6
页数:5
相关论文
共 25 条
[1]  
Shi Z., Wyman I., Liu G., Hu H., Zou H., Hu J., Polymer, 54, pp. 6406-6414, (2013)
[2]  
Abdel-Halim E.S., Abdel-Mohdy F.A., Fouda M.M.G., El-Sawy S.M., Hamdy I.A., Al-Deyab S.S., Carbohyd Polym, 86, pp. 1389-1394, (2011)
[3]  
Xue C.H., Chen J., Yin W., Jia S.T., Ma J.Z., Appl Surf Sci, 25, pp. 82468-82472, (2012)
[4]  
Rehan M., Hartwig A., Ott M., Gatjen L., Wilken R., Surf Coat Tech, 219, pp. 50-58, (2013)
[5]  
Alongi J., Carosio F., Frache A., Malucelli G., Carbohyd Polym, 92, pp. 114-119, (2013)
[6]  
Ugur S.S., Sariisik M., Aktas A.H., Mater Res Bull, 46, pp. 1202-1206, (2011)
[7]  
Lu Y., Liang Q., Xue L., Appl Surf Sci, 258, pp. 4782-4787, (2012)
[8]  
Molina J., Fernandez J., Rio A.I., Bonastre J., Cases F., Appl Surf Sci, 279, pp. 46-54, (2013)
[9]  
Liu D., Zhao W., Liu S., Cen Q., Xue Q., Surf Coat Tech, 286, pp. 354-364, (2016)
[10]  
Zeng W., Shu L., Li Q., Chen S., Wang F., Tao X.M., Adv Mater, 26, pp. 5310-5336, (2014)