Research progress on optimizing two-phase refrigerant distribution and boiling heat transfer in microchannel evaporators

被引:0
作者
Tang Z. [1 ]
Guo W. [1 ]
Wu S. [1 ]
Zhao R. [1 ]
Huang D. [1 ]
机构
[1] School of Energy and Power Engineering, Xi’an Jiaotong University, Shaanxi, Xi’an
来源
Huagong Xuebao/CIESC Journal | 2023年 / 74卷 / 10期
关键词
evaporation; gas-liquid flow; heat transfer; microchannel evaporator; two-phase distribution;
D O I
10.11949/0438-1157.20230650
中图分类号
学科分类号
摘要
Microchannel evaporators are widely used in refrigeration systems due to low charge capacity, high heat transfer performance, and low cost. Further improvement in the performance of microchannel evaporators helps to reduce refrigerant charge and increase the compactness of microchannel heat exchangers. The microchannel evaporator is mainly composed of a header and microchannel flat tubes. Optimizing the distribution of two-phase refrigerant in the header and enhancing the flow boiling inside the microchannel flat tubes can effectively improve the overall performance of the microchannel evaporator. First, the factors affecting the two-phase distribution in the header and the flow boiling characteristics in the microchannel flat tube were clarified. Then, measures to improve the two-phase refrigerant distribution scheme and enhance flow boiling are summarized. Finally, further prospects are given for methods to improve the performance of microchannel evaporators. © 2023 Chemical Industry Press. All rights reserved.
引用
收藏
页码:4020 / 4036
页数:16
相关论文
共 76 条
[1]  
Zhang Z H, Liu L L, Wang R N, Et al., Thoughts on technical development of refrigeration and air-conditioning industry under carbon peaking and carbon neutrality goals, Refrigeration and Air-Conditioning, 22, 1, pp. 1-10, (2022)
[2]  
McNeil M A, Feng W, de la Rue du Can S, Et al., Energy efficiency outlook in China’s urban buildings sector through 2030, Energy Policy, 97, pp. 532-539, (2016)
[3]  
Zhang Z H, Chen J L, Gao Y, Et al., Analysis on the influence of Kigali Amendment to Montreal Protocol to refrigeration and air-conditioning industry, Refrigeration and Air-Conditioning, 17, 1, pp. 1-7, (2017)
[4]  
Ge Y, Jiang W T., The research progress and application of the micro-channel heat exchanger, Chemical Industry and Engineering Progress, 35, pp. 10-15, (2016)
[5]  
Zhang P, Hrnjak P S., Effect of some geometric parameters on performance of PF<sup>2</sup> heat exchangers in periodic frosting, International Journal of Refrigeration, 33, 2, pp. 334-346, (2010)
[6]  
Li F, Wu S Y, Ma Z H, Et al., Effect of surface coating on defrosting water drainage characteristics of vertical-fin microchannel frosting evaporator, Applied Thermal Engineering, 208, (2022)
[7]  
Brix W, Kaern M R, Elmegaard B., Modelling refrigerant distribution in microchannel evaporators, International Journal of Refrigeration, 32, 7, pp. 1736-1743, (2009)
[8]  
Brix W, Kaern M R, Elmegaard B., Modelling distribution of evaporating CO<sub>2</sub> in parallel minichannels, International Journal of Refrigeration, 33, 6, pp. 1086-1094, (2010)
[9]  
Kulkarni T, Bullard C W, Cho K., Header design tradeoffs in microchannel evaporators, Applied Thermal Engineering, 24, 5, pp. 759-776, (2004)
[10]  
Bowers C D, Mai H, Elbel S, Et al., Refrigerant distribution effects on the performance of microchannel evaporators, International Refrigeration and Air Conditioning Conference, (2012)