Simulations of ultrasonic cavitation micro-jet impact with different angles based on CEL

被引：0

作者：

Ye L. ^{[1
]}

Zhu X. ^{[1
]}

Wang J. ^{[1
]}

Zhang L. ^{[1
]}

机构：

[1] School of Mechanics and Power Engineering, North University of China, Taiyuan

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2016年 / 35卷 / 16期

关键词：

CEL; Different angles; Micro-jet impact; Ultrasonic cavitation; Wall deformation;

D O I：

10.13465/j.cnki.jvs.2016.16.021

中图分类号：

学科分类号：

摘要：

To explore changes of the wall characteristics under the impact of the cavitation micro-jet with different angles in the ultrasonic honing, the Coupled Eulerian-Lagrangian(CEL) method was employed to establish a model of ultrasonic cavitation micro-jet impinging on a wall and conduct numerical simulations. The results show that micro pits appear on the wall under the micro-jet impact and its maximum depth can reach 0.11 μm. The lateral jet velocity on the back side of the micro-jet is lower than that on the front side, and the pressure, pit depth and equivalent strain of the back side are all higher than that of the front side. With the increase of the impact angle, wall pressure, pit depth and equivalent strain all slightly increase first and then decrease. The shock effect of micro-jet is the strongest at 15°. Much micro-jet impinging on the wall is useful to the material removal in the ultrasonic honing. © 2016, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：130 / 134and157

共 15 条

[1]

Zhang M., Li X., Jiang R., Et al., Amplitude distribution and cavitation corrosion field of ultrasonic transducer system, Journal of Vibration and Shock, 33, 13, pp. 59-62, (2014)

[2]

Brujan E.A., Ikeda T., Matsumoto Y., On the pressure of cavitation bubbles, Experimental Thermal and Fluid Science, 32, 5, pp. 1188-1191, (2008)

[3]

Liu G., Zhu X., Guo C., Research on modelling and simulation of cavitation sound field in the grinding zone of the power ultrasonic honing, Acta Acustica, 38, 6, pp. 663-668, (2013)

[4]

Cook S.S., Erosion by water-hammer, Proceedings of the Royal Society of London Series A, Containing Papers of a Mathematical and Physical Character, 119, 783, pp. 481-488, (1928)

[5]

Xie Y., Wang Y., Chen J., Et al., Numerical and experimental study on mechanism of material damage by high speed liquid-solid impact, Proceedings of the CSEE, 35, pp. 109-118, (2009)

[6]

Sun L., Zhang Z., Ding J., Et al., Pressure characteristics of panels subjected to collision of compressible jet, Journal of Vibration and Shock, 32, 3, pp. 178-181, (2013)

[7]

Shi C., Yuan J., Wu F., Et al., Influence analysis of impact angle on material removal profile in fluid jet polishing, Acta Optica Sinica, 30, 2, pp. 513-517, (2010)

[8]

Guo C., Zhu X., Wang J., Et al., Dynamical behaviors of double cavitation bubbles under ultrasonic honing, Chinese Journal of Theoretical and Applied Mechanics, 46, 6, pp. 879-886, (2014)

[9]

Du L., Finite element analysis of bird striking on a composite wing leading edge based on Eulerian-Lagrangian method, Journal of Vibration and Shock, 31, 7, pp. 137-141, (2012)

[10]

Futakawa M., Naoe T., Kogawa H., Et al., Micro-impact damage caused by mercury bubble collapse, JSME International Journal Series A, 48, 4, pp. 234-239, (2005)

← 1 2 →