Research on security and stability control strategy for weak sending-end system of large capacity HVDC power transmission system

被引：0
作者：
Li, Chaoshun [1 ]
Zhang, Zhengmao [2 ]
Kang, Jiyang [3 ]
机构：
[1] Shenyang Electric Power Survey and Design Institute, Shenyang 110003, Liaoning Province
[2] State Grid of China Technology College, Jinan 250002, Shandong Province
[3] School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, Liaoning Province
来源：
Dianwang Jishu/Power System Technology | 2014年 / 38卷 / 01期
关键词：
Control strategy; HVDC; Isolated operation; Weak sending-end system;
D O I：
10.13335/j.1000-3673.pst.2014.01.005
中图分类号：
学科分类号：
摘要：
As an HVDC power outward transmission channel for thermal power base located in Hulunbeir league, Inner Mongolia Autonomous Region, the HVDC power transmission line from Hulunbeir league to Liaoning province can be parallelly operated with HVAC power outward transmission channel located in Hulunbeir league, however the AC system at the sending end of the HVDC power transmission line is relatively weak, so it remains with typical weak sending-end system of large capacity HVDC power transmission system and under particular situation it is possible for this system to be turned into isolated operating mode. According to operational characteristics of the HVDC power transmission line, problems respectively existed under three operating conditions of the HVDC power transmission line, namely the parallel operating mode of HVDC power transmission with HVAC power transmission, turning from grid-connected operating mode into isolated operating mode and isolated operating mode, as well as the needed control measures are researched, and security and stability control strategies to be adopted after the occurrence of faults under above-mentioned three operating conditions are proposed and analyzed.
引用
收藏
页码：28 / 32
页数：4
相关论文
共 19 条
  • [1] She C., Liu X., Summary of ±800 kV HVDC transmission technology development, Value Engineering, 12, pp. 19-20, (2012)
  • [2] pp. 17-25, (2007)
  • [3] 15, 7, pp. 12-13, (2008)
  • [4] Cai H., Jin X., Zhang D., Implementation scheme of over-voltage protection for islanding operation of Yun-Guang UHVDC, High Voltage Engineering, 34, 12, pp. 2886-2890, (2008)
  • [5] Wang J., Sun H., Zhang J., Et al., Stability characteristics and coordinated control strategy of interconnected grid integrated with UHVDC transmission line from Jinping to Sunan, Power System Technology, 36, 12, pp. 66-70, (2012)
  • [6] Yang J., Gao C., Zha K., Et al., Key stresses in minimum AC voltage operational tests of thyristor valves for ±660 kV HVDC transmission project from Ningdong to Shandong, Power System Technology, 35, 9, pp. 60-66, (2011)
  • [7] Guo H., Xie G., Zhu Y., Et al., Digital/analog hybrid simulation of Tibet grid integrated with ±400 kV DC transmission line from Qinghai to Tibet, Power System Technology, 37, 2, pp. 455-459, (2013)
  • [8] Hu M., Cai H., Tian J., Et al., Study of overvoltage control schemes for Yun-Guang UHVDC transmission system in island operation, High Voltage Engineering, 34, 9, pp. 1905-1909, (2008)
  • [9] Ma Y., Shi Y., Yin W., Et al., Additional control strategy for islanded AC system at sending terminal of HVDC, Power System Technology, 30, 24, pp. 22-25, (2006)
  • [10] Li Y., Ma W., Yin W., Et al., Island operation modes XS800 UHVDC system, High Voltage Engineering, 36, 1, pp. 185-189, (2010)
12