Optimization of adhesive layer thickness at metal bonding using quick-setting adhesives

被引：0

作者：

Brozek, Milan ^{[1
]}

机构：

[1] Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Kamýcká 129, 165 21 Praha 6 - Suchdol, Czech Republic

来源：

Manufacturing Technology | 2013年 / 13卷 / 04期

关键词：

Adhesive joints - Corundum;

D O I：

暂无

中图分类号：

P57 [矿物学];

学科分类号：

070901 ;

摘要：

In the contribution the results of bonded joints laboratory tests are published. For bonding of test samples five different types of quick-setting adhesives were used. The determination of the tensile lap-shear strength of rigidto- rigid bonded assemblies according to the standard CSN EN 1465 (66 8510) was the aim of carried out tests. The samples were made from steel and duralumin sheets. Ahead of bonding the surfaces of all samples were blasted using corundum grit and degreased. Bonded joints of different adhesive layer thickness were tested. The layer thickness was secured using two copper wires of the appropriate diameter, which were placed between the bonded surfaces. By the test results evaluation the optimum adhesive layer thicknesses were determined, when the concrete bonded joint strength is the highest.© 2013 Published by Manufacturing Technology.

引用

页码：419 / 423