On the use of nanotechnology to manage steel corrosion

被引：6

作者：

Shi X. ^{[1
,2
]}

机构：

[1] Corrosion and Sustainable Infrastructure Laboratory, Western Transportation Institute, College of Engineering, Montana State University, Bozeman, MT 59717-4250

[2] Civil Engineering Department, Montana State University, Bozeman, MT 59717-2220

来源：

Recent Patents on Engineering | 2010年 / 4卷 / 01期

关键词：

Anti-corrosion coatings; High-performance steel; Nanoparticles; Nanotechnology; Steel corrosion;

D O I：

10.2174/187221210790244730

中图分类号：

学科分类号：

摘要：

In the last two decades, nanotechnology has been playing an increasing important role in supporting innovative technological advances to manage the corrosion steel. This paper reviews various recent patents and patent applications related to the management of steel corrosion, including the use of nanotechnology to produce high-performance steel, to produce coatings with superior abrasion resistance and good corrosion resistance, to enhance the surface of steel designed for oxidizing and corrosive environments, and to prepare nano-sized additives for anti-corrosion coatings or intelligent corrosion protection systems, or for reducing the corrosion risk of the service environment. The 16 inventions reviewed concern a period extending from the years 2005 up to date. The paper concludes with a discussion of current and future developments expected in the subjects covered. © 2010 Bentham Science Publishers Ltd.

引用

页码：44 / 50

页数：6

共 34 条

[1]

Liu Y., Shi X., Cathodic Protection Technologies For Reinforced Concrete: Introduction and Recent Developments, (2009)

[2]

Liu Y., Shi X., Electrochemical chloride extraction and electrochemical injection of corrosion inhibitor in concrete, State of The Knowledge. Corrosion Rev, 21, 1-2, pp. 53-82, (2009)

[3]

Murayama M., Nishimura T., Tsuzaki K., Nano-scale chemical analysis of rust on a 2% Si-bearing low alloy steel exposed in a coastal environment, Corrosion Sci, 50, 8, pp. 2159-2165, (2008)

[4]

Kolpakov S.V., Parshin V.A., Chekhovoi A.N., Nanotechnology in the metallurgy of steel, Steel Translat, 37, 8, pp. 716-721, (2007)

[5]

Kusinski G.J., Pollack D., Thomas G., (2004)

[6]

Lekka M., Kouloumbi N., Gajo M., Bonora P.L., Corrosion and wear resistant electrodeposited composite coatings, Electrochim Acta, 50, 23, pp. 4551-4556, (2005)

[7]

Feng Q., Li T., Teng H., Et al., Investigation on the corrosion and oxidation resistance of Ni-Al2O3 nano-composite coatings prepared by sediment co-deposition, Surf Coat Technol, 202, 17, pp. 4137-4144, (2008)

[8]

Shen G.X., Chen Y.C., Lin C.J., Corrosion protection of 316L stainless steel by a TiO2 nanoparticle coating prepared by sol-gel method, Thin Solid Films, 489, 1-2, pp. 130-136, (2005)

[9]

Khaled M., Abu-Sharkh B., Amr E., Yilbas B.S., Manda A., Abulkibash A., Corrosion properties of 316L stainless steel coated with polyelectrolyte multilayers of varying anionic acidity, Corrosion Eng Sci Technol, 42, 4, pp. 356-362, (2007)

[10]

Alam J., Riaz U., Ashraf S.M., Ahmad S., Corrosion-protective performance of nano polyaniline/ferrite dispersed alkyd coatings, J Coat Technol Res, 5, 1, pp. 123-128, (2007)

← 1 2 3 4 →