Study on seismic performance of high damping concrete coupled shear walls with concealed steel plate bracings

被引：0

作者：

Wang M.-F. ^{[1
]}

Wang Y.-J. ^{[1
]}

机构：

[1] College of Civil Engineering, Hunan University, Changsha, 410082, Hunan

来源：

Gongcheng Lixue/Engineering Mechanics | 2017年 / 34卷 / 01期

关键词：

Concealed steel plate bracing; High damping concrete; Quasi-static loading test; Seismic performance; Shear wall;

D O I：

10.6052/j.issn.1000-4750.2015.07.0543

中图分类号：

学科分类号：

摘要：

Quasi-static cyclic loading tests on two one-fourth scale models of four-story high damping concrete coupled shear walls (HDCSW) with concealed steel plate bracings are carried out, the bearing capacity, ductility, energy dissipation, and failure characteristics of the test models are analyzed systematically and are compared with those of HDCSW with mixed concealed bracings. Meanwhile, finite element analysis of HDCSW with concealed steel plate bracings under low-cycle load are conducted using the software ABAQUS. The results of numerical simulation and model experiments show that, compared with the HDCSW with mixed concealed bracings, the ultimate bearing capacity, the energy dissipation and the deformation capacity of the HDCSW with concealed steel plate bracings are improved; with decreasing span-depth ratio in the coupling beams, the HDCSW with concealed steel plate bracings show increasingly better seismic performance; when the steel ratios of wall limbs and coupling beams are less than 2.5% and 3%, respectively, the effect of the steel ratio on the ultimate bearing capacity of the HDCSW with concealed steel plate bracings is greater. © 2017, Engineering Mechanics Press. All right reserved.

引用

页码：204 / 212

页数：8

共 27 条

[1]

Iliya R., Bertero V.V., Effect of amount and arrangement of wall-panel reinforcement on hysteretic behavior of reinforced concrete walls, pp. 1-12, (1980)

[2]

Paulay T., Priestley M.J.N., Synge A.J., Ductility in earthquake squat shear walls, ACI Journal, 79, 4, pp. 257-269, (1982)

[3]

Salonikios T.N., Kappos A.J., Tegos I.A., Et al., Cyclic load behavior of low-slenderness reinforced concrete walls-failure modes, strength and deformation analysis, and design implications, ACI Structural Journal, 97, 1, pp. 132-142, (2000)

[4]

Salonikios T.N., Kappos A.J., Tegos I.A., Et al., Cyclic load behavior of low-slenderness reinforced concrete walls- design basis and test results, ACI Structural Journal, 96, 4, pp. 649-660, (1999)

[5]

Zhang J., Dan S., Cao W., Et al., Earthquake simulation test on mid-rise recycled concrete shear walls with concealed bracings, Engineering Mechanics, 29, pp. 101-106, (2012)

[6]

Cao W., Zhang J., Tian B., Et al., Experimental study on seismic behavior of mid-rise R.C. shear wall with concealed bracings, Journal of Building Structures, 23, 6, pp. 26-32, (2002)

[7]

Cao W., Zhang J., Huang X., Et al., Seismic performance and engineering application of RC short-pier shear walls and core walls with concealed bracings, Engineering Mechanics, 22, pp. 94-106, (2005)

[8]

Paulay T., Binney J.R., Diagonally Reinforced Coupling Beams Of Shear Walls, pp. 579-598, (1974)

[9]

Subedi N.K., Baglin P.S., Ultimate load analysis of steel plate reinforced concrete beams, Engineering Structure, 23, 9, pp. 1068-1079, (2001)

[10]

Fu J., Zhao J., Bai S., Et al., Test study on the small span-to depth ration seismic coupling beams with low reinforcement rate by new reinforcement scheme, Journal of Chongqing Jianzhu University, 26, 1, pp. 50-54, (2004)

← 1 2 3 →