Permanent magnets with embedded phase changing material for electric motor thermal management

被引:1
|
作者
Lamarre, Jean-Michel [1 ]
Ibrahim, Maged [2 ]
Pelletier, Roger [1 ]
Vatandoost, Hossein [1 ]
Bernier, Fabrice [1 ]
机构
[1] Automot Res Ctr, Natl Res Council Canada, Boucherville, PQ J4B6Y4, Canada
[2] German Int Univ Cairo, Adm Capital, Reg Ring Rd, Cairo Governorate Desert, Cairo, Egypt
关键词
IMPROVEMENT; ERYTHRITOL; MACHINES; POWER;
D O I
10.1063/5.0219982
中图分类号
O59 [应用物理学];
学科分类号
摘要
The magnetic performance of NdFeB permanent magnets rapidly decreases as their operation temperature increases. This limits the power output of electric motors as their internal temperature quickly increases with the power demand. This is particularly problematic for applications where high peak power is required for a short period of time, for example during automobile highway acceleration or during an airplane lift-off. With the advances in additive manufacturing, one can envision to fabricate more complex motor geometries and magnetic structures, without additional costs, allowing for enhanced functionalities such as better thermal management. In this context, this paper investigates the feasibility of using phase changing materials (PCMs) to mitigate the temperature rise in permanent magnets (PMs) fabricated by additive manufacturing. The potential of PCM and its relevance was validated by modeling the thermal response of an electric motor during a representative electric vehicle driving scenario. It was found that segmented magnets with embedded phase changing materials would allow to efficiently control temperature rise. To validate the simulation results, PM test pieces with and without embedded PCMs were fabricated using cold spray additive manufacturing and tested using a custom laser thermal cycling setup.
引用
收藏
页数:8
相关论文
共 35 条
  • [31] Experimental study on thermal management and performance improvement of solar PV panel cooling using form stable phase change material
    Marudaipillai, Senthil Kumar
    Ramaraj, Balasubramanian Karuppudayar
    Kottala, Ravi Kumar
    Lakshmanan, Maheswari
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (01) : 160 - 177
  • [32] Study of a medium-temperature eutectic composite phase change material with effective thermal management in lithium-ion batteries
    Shi, Fulin
    Shi, Haokun
    Du, Min
    Wu, Wanqing
    Yin, Rui
    Zhou, Dedi
    Zheng, Qinggong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2025, 240
  • [33] Application of novel double-layer micro-jet heat sinks for energy-efficient thermal management of motor inverters in electric vehicles
    Mazaheri, Nima
    Mwesigye, Aggrey
    APPLIED THERMAL ENGINEERING, 2023, 231
  • [34] Experimental and numerical study on a novel hybrid battery thermal management system integrated forced-air convection and phase change material
    Qin, Peng
    Liao, Mengran
    Zhang, Danfeng
    Liu, Yujun
    Sun, Jinhua
    Wang, Qingsong
    ENERGY CONVERSION AND MANAGEMENT, 2019, 195 : 1371 - 1381
  • [35] Assessment of the effect of distance between lithium-ion batteries with a number of triangular blades, on the thermal management of the battery pack in a chamber full of phase change material
    Mansir, Ibrahim B.
    Sinaga, Nazaruddin
    Farouk, Naeim
    Alqsair, Umar F.
    Diyoke, Chidiebere
    Nguyen, Dinh Duc
    JOURNAL OF ENERGY STORAGE, 2022, 51