Strengthening of concrete slab-column connections using CFRP strips

被引:0
|
作者
Soudki, Khaled [1 ]
El-Sayed, Ahmed K. [2 ]
Vanzwol, Tim [1 ]
机构
[1] Department of Civil and Environmental Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Ontario
[2] Center of Excellence for Concrete Research & Testing, Department of Civil Engineering, King Saud University, P.O. Box 800, Riyadh
关键词
Carbon fiber-reinforced polymer; Concrete slabs; Punching shear; Strengthening;
D O I
10.1016/j.jksues.2011.07.001
中图分类号
学科分类号
摘要
This paper presents experimental data and results on the effect of externally bonded carbon fiber-reinforced polymer (CFRP) strips on the punching shear of interior slab-column connections. A total of six square slabs with a concentric column were constructed with overall dimensions of 1220 mm by 1220 mm and 100 mm thick slab and 150 × 150 mm column. The test variables were the configuration and amount of CFRP strips externally bonded to the tension face of the slab. The specimens were simply supported along their edges and tested in punching with vertical load applied through the central column. The test results clearly showed that CFRP strengthening leads to significant improvements in the structural behaviour of slab-column connections. The increase in punching capacity of strengthened slabs was up to 29%, while the increase in stiffness was up to 80% compared to the unstrengthened slab. Punching capacities of the test specimens were evaluated using a recently developed model that accounts for both configuration and amount of CFRP strips. The predicted punching capacities using the analytical model were compared with the experimental results, and good agreement was found. © 2011
引用
收藏
页码:25 / 33
页数:8
相关论文
共 50 条
  • [31] UST failure criterion for punching shear analysis of reinforcement concrete slab-column connections
    Zhang, XS
    Guan, H
    Loo, YC
    COMPUTATIONAL MECHANICS, VOLS 1 AND 2, PROCEEDINGS: NEW FRONTIERS FOR THE NEW MILLENNIUM, 2001, : 299 - 304
  • [32] PUNCHING SHEAR RESISTANCE OF CORNER SLAB-COLUMN CONNECTIONS
    HAMMILL, N
    GHALI, A
    ACI STRUCTURAL JOURNAL, 1994, 91 (06) : 697 - 707
  • [33] Slab-column edge connections subjected to high moments
    El-Salakawy, EF
    Polak, MA
    Soliman, MH
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1998, 25 (03) : 526 - 538
  • [34] Punching and lateral cyclic behavior of concrete slab-column connections reinforced with steel sheets
    Xia, Chengliang
    Shi, Qingxuan
    Rong, Chong
    Wang, Bin
    STRUCTURES, 2024, 67
  • [35] Two-way shear strength of reinforced concrete transfer slab-column connections
    Kang, Su-Min
    Na, Su-Jeong
    Hwang, Hyeon-Jong
    ENGINEERING STRUCTURES, 2021, 231
  • [36] Punching shear strength of interior concrete slab-column connections reinforced with steel fibers
    Choi, Kyoung-Kyu
    Taha, Mahmoud M. Reda
    Park, Hong-Gun
    Maji, Arup K.
    CEMENT & CONCRETE COMPOSITES, 2007, 29 (05) : 409 - 420
  • [37] Punching shear strength of reinforced concrete transfer slab-column connections with shear reinforcement
    Kang, Su-Min
    Na, Su-Jeong
    Hwang, Hyeon-Jong
    ENGINEERING STRUCTURES, 2021, 243
  • [38] Cyclic lateral loading of nonductile slab-column connections
    Department of Structural Engineering, University of Hawaii at Manoa, Honolulu, HI, United States
    ACI Struct J, 2006, 3 (356-364):
  • [39] Cyclic testing of slab-column connections with shear reinforcement
    Robertson, IN
    Kawai, T
    Lee, J
    Enomoto, B
    ACI STRUCTURAL JOURNAL, 2002, 99 (05) : 605 - 613
  • [40] Cyclic lateral loading of nonductile slab-column connections
    Robertson, I
    Johnson, G
    ACI STRUCTURAL JOURNAL, 2006, 103 (03) : 356 - 364