Rosette eddy current sensor and its experimental research on aircraft metallic structure fatigue damage monitoring

被引：3

作者：

Ding, Hua ^{[1
]}

He, Yuting ^{[1
]}

Du, Jinqiang ^{[1
]}

Jiao, Shenbo ^{[1
]}

机构：

[1] Aeronautics and Astronautics Engineering College, Air Force Engineering University

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2013年 / 49卷 / 02期

关键词：

Aircraft metallic structure; Fatigue damage; Fractographic quantitative analysis; Rosette eddy current sensor; Structural health monitoring;

D O I：

10.3901/JME.2013.02.001

中图分类号：

学科分类号：

摘要：

Fatigue damage monitoring of aircraft metallic structure is critical to flight safety. Based on the previous work of ref.[13], a kind of rosette eddy current sensor is proposed, and monitoring experiment of 2A12-T4 aluminum alloy under constant load based on constructed fatigue-crack monitoring system is carried out, which intends to validate the quantitative crack-monitoring capability of rosette eddy sensor through comparison between experimental result and fractographic quantitative analysis result. The comparison result shows that amplitude ratio of sensing-channel signal is sensitive to the crack propagation, and has step feature. When the crack extends from the position of sensing-channel to adjacent channel position, the amplitude ratio of sensing-channel signal increases sharply, and then increases slowly after the adjacent channel position. Viewing the changing-point as indication of crack position, the quantitative-monitoring capability of fatigue crack is achieved by rosette eddy current sensor with precision of 1 mm, and the sensing-channels near fatigue source are capable of qualitative-monitoring of accumulated fatigue damage. © 2013 Journal of Mechanical Engineering.

引用

页码：1 / 7

页数：6

共 16 条

[11]

Yang B., Luo F., Cao X., Et al., Array pulse eddy current imaging system used to detect corrosion, Chinese Journal of Mechanical Engineering, 18, 2, pp. 196-198, (2005)

[12]

Joubert P.Y., Bihan L.Y., Multi sensor probe and defect classificationin eddy current tubing inspection, Sensors and Actuators A: Physical, 129, 1-2, pp. 10-14, (2006)

[13]

Goldfine N., Zilberstein V., Cargill J.S., Et al., MWM-array eddy current sensors for defection of cracks in regions with fretting damage, Material Evaluation, 60, 7, pp. 870-877, (2002)

[14]

Yanko S., Deep Penetration Magnetoquasistatic Sensors, (2001)

[15]

Liu J., Bai P., Tang X., Virtual instrument design under LabWindows/CVI, (2003)

[16]

Zheng S., Lou M., Fan W., Et al., Measuring method for phase difference basd on mutli-layer correlation, Journal of Astronautic Metrology and Measurement, 28, 5, pp. 58-60, (2008)

← 1 2 →