A novel current-fed bidirectional isolated dc-dc converter with full-operating-range zvs

被引：0

作者：

Sun X. ^{[1
]}

Wu X. ^{[1
]}

Shen Y. ^{[1
]}

Cui M. ^{[1
]}

Li X. ^{[1
,2
]}

机构：

[1] Key Lab of Power Electronics for Energy Conservation and Motor Drive of Hebei Province, Yanshan University, Qinhuangdao

[2] College of Life Science and Bio-Engineering, Beijing University of Technology, Beijing

来源：

Li, Xin (yddylixin@ysu.edu.cn) | 2018年 / China Machine Press卷 / 33期

关键词：

current-fed bidirectional isolated DC-DC converter; phase shift plus PWM control; Wide input voltage range; zero-voltage switching;

D O I：

10.19595/j.cnki.1000-6753.tces.161132

中图分类号：

学科分类号：

摘要：

In order to suppress the turn-off voltage spike and overcome the hard-switching in traditional current-fed bidirectional converters, this paper presents a novel current-fed bidirectional isolated DC-DC converter with full-operating-range zero-voltage switching (ZVS). The primary side of the proposed converter is a Boost half bridge, which can decrease the voltage stress on primary side switches. The secondary side of the proposed converter parallels two active half bridges, and the reverse current can be changed by adjusting the phase-shift angle within the secondary side. The converter adopts the hybrid phase shift plus pulse width modulation (PWM) control to make all switches realize ZVS in full operating range. Firstly, the corresponding operating principles are introduced. Then characteristics including the power transfer and soft-switching are investigated in detail. Finally, an experimental prototype with 30-60V input and 400 V/2.5 A output is built to verify the converter and the control strategy. © 2018, Electrical Technology Press Co. Ltd. All right reserved

引用

页码：2282 / 2292

页数：10

共 19 条

[1]

Jin K., Ruan X., Et al., Hybrid fuel cell power system, Transactions of China Electrotechnical Society, 23, 3, pp. 92-98, (2008)

[2]

Metri J.I., Saadeh C.T., Kanaan H.Y., Design, control and simulation of a fuel-cell-fed power conversion system for electric vehicles, IEEE International Conference on Renewable Energies for Developing Countries, Beirut, pp. 199-204, (2014)

[3]

Pan X., Rathore A.K., Novel bidirectional snubberless soft-switching naturally clamped zero current commutated current-fed dual active bridge (CFDAB) converter for fuel cell vehicles, IEEE Energy Conversion Congress and Exposition, Denver, pp. 1894-1901, (2013)

[4]

Hu T., Xu L., Et al., Research of multilevel converters on HEV, Transactions of China Electrotechnical Society, 30, 14, pp. 261-268, (2015)

[5]

Tao H., Duarte J.L., Hendrix M.A.M., Three-port triple-half-bridge bidirectional converter with zero- voltage switching, IEEE Transactions on Power Electronics, 23, 2, pp. 782-792, (2008)

[6]

Wen H., Xiao W., Su B., Nonactive power loss minimization in a bidirectional isolated DC-DC converter for distributed power systems, IEEE Transactions on Industrial Electronics, 61, 12, pp. 6822-6831, (2014)

[7]

Yu X., Starke M.R., Et al., Fuel cell power conditioning for electric power applications: a summary, IET Electric Power Applications, 1, 5, pp. 643-656, (2007)

[8]

Qu P., Li Z., Et al., Pre-charge strategy study for isolated dual active bridge DC-DC converter, Transactions of China Electrotechnical Society, 29, pp. 320-325, (2014)

[9]

Wang C., Sha G., Et al., The analysis of zero voltage switching dual active bridge DC-DC converters based on dual-phase-shifting control, Transactions of China Electrotechnical Society, 30, 12, pp. 106-113, (2015)

[10]

Chakraborty S., Chattopadhyay S., Analysis and comparison of voltage-source and current-source asymmetric dual-active half-bridge converters, IEEE Energy Conversion Congress and Exposition, Pittsburgh, pp. 2072-2079, (2014)

← 1 2 →