Non-destructive testing of adhesive bonded structures

被引：0

作者：

Kurpiński, Michal ^{[1
]}

Fidali, Marek ^{[1
]}

机构：

[1] Silcsian University of Technology, Faculty of Mechanical Engineering, Institute of Fundamentals of Machincry Design, 18a Konarskicgo Str., Glimice,44-100, Poland

来源：

Diagnostyka | 2017年 / 18卷 / 02期

关键词：

Thermography (imaging) - Ultrasonic testing - Industrial research - Adhesive joints - Nondestructive examination;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Adhesive bonded joints arc one of the most popular type of joints in the production process of modern cars [1, 2, 3], That came from their uncommonly good features i.e. durability, visual and economical properties [1.2]. However, during the production process some defects can occur. There are many Non-Destruelive Testing (NUT) methods which allow detection of different defects of adhesive joints and increase the quality of the production process as well as the produced part. In the first part of the article, a review of the most valuable NDT methods was presented, especially from the point of view of application to automated testing of aulomotive parts In the second part, two contaetless NDT methods (EMAT ultrasonic technology and active thermography) were applied to prepared bonded joints Results of preliminary laboratory tests were compared. The aim of the research was to point out the most suitable method for industrial application.

引用

页码：95 / 103