Research on FBG flow and temperature composite sensor based on the PSO decoupling algorithm

被引:0
|
作者
Sun S. [1 ]
Xiang Y. [1 ]
Dang X. [2 ]
Zhang H. [1 ]
He S. [1 ]
机构
[1] School of mechatronic and vehicle engineering, Chongqing Jiaotong University, Chongqing
[2] School of intelligent Engineering, Chongqing College of Mobile Communication, Chongqing
关键词
Composite measurement; Fiber Bragg grating; Flow; Particle swarm algorithm; Temperature;
D O I
10.19650/j.cnki.cjsi.J2107993
中图分类号
学科分类号
摘要
The decoupling in the fiber Bragg grating flow and temperature composite sensing is a difficult problem. To address this issue, a fiber Bragg grating flow and temperature composite sensor based on particle swarm decoupling algorithm is proposed. Firstly, combining the fiber Bragg grating sensing theory and the flow and temperature composite sensing theory, the flow and temperature composite sensing mechanism based on the fiber Bragg grating is studied. Then, a fiber Bragg grating flow and temperature composite sensor that integrate target structure with the cantilever beam of hollow cylinder is designed, a flow and temperature experiment system platform is established. The temperature and flow composite sensing experiments are carried out. Finally, a FBG flow and temperature composite sensor decoupling method based on the particle swarm algorithm is proposed. The proposed particle swarm optimization algorithm is used to decouple the experimental data from the flow and temperature. Research results after decoupling show that the maximum flow error of the sensor in the range of 3~8 m3/h is 0.014 m3/h, the maximum temperature error is 0.021℃, the flow measurement error is 0.28%, the temperature measurement error is 1.5%, the flow mean-square error is 1.16×10-4 m3/h, and the temperature mean-square error is 1.53×10-4℃. Compared with the neural network algorithm, results show that the particle swarm optimization algorithm has a good decoupling effectiveness. The measurement accuracy of the sensor could be improved effectively. © 2022, Science Press. All right reserved.
引用
收藏
页码:2 / 10
页数:8
相关论文
共 24 条
  • [1] QU D M, SUN G K, LI H, Et al., Optical fiber sensing and reconstruction method for morphing wing flexible skin shape, Chinese Journal of Scientific Instrument, 39, 1, pp. 144-151, (2018)
  • [2] LIU F CH, FENG J L, WANG Y, Et al., Sensitivity to temperature and strain of bridge structure of FBG sensor, Optical Instruments, 39, 1, pp. 26-30, (2017)
  • [3] XUE R F, REN B Y, HUANG J Q, Et al., Design and evaluation of FBG-based tension sensor in laparoscope surgical robots, Sensors, 18, 7, (2018)
  • [4] LIU CH T, ZHANG ZH Y, LI H C, Et al., Flow/pressure/temperature simultaneous measurement technology in hydraulic system based on FBG, Acta Photonica Sinica, 45, 11, pp. 10-16, (2016)
  • [5] ZHAO Q, ZHENG H K, LYU R Q, Et al., Novel integrated optical fiber sensor for temperature, pressure and flow measurement, Sensors and Actuators, 280, pp. 68-75, (2018)
  • [6] TONG X L, HE W, ZHANG C, Et al., Research and application progress of fiber Bragg grating and Fabry-Perot sensors in the field of aeronautics and astronautics, Laser Journal, 39, 7, pp. 1-7, (2018)
  • [7] CHEN Y, YANG X, LIU H L, Et al., Processing FBGs sensing signals with exponent modified gaussian curve fitting peak detection method, Spectroscopy and Spectral Analysis, 36, 5, pp. 1526-1531, (2016)
  • [8] ZHANG K, ZHAO SH H, WANG X, Et al., Generation and transmission of ultra-wideband linear frequency modulation signal using frequency-sweeping lasers, Chinese Journal of Lasers, 47, 6, pp. 252-263, (2020)
  • [9] ZOU B X, XU SH W, MIAO J, Et al., Feature extraction and recognition of vibration signals in optical fiber security system, Journal of Computer Research and Development, 56, 9, pp. 1859-1871, (2019)
  • [10] YAO B, ZHANG J X, DAI Y, Et al., Research on decoupling method of multi-dimensional force sensor used in minimally invasive surgical robot, Chinese Journal of Scientific Instrument, 41, 1, pp. 147-153, (2020)