Modeling of chatter recognition system in CNC milling based on ESPRIT and hidden Markov model

被引：0
|
作者：
Han Z. [1 ]
Jin H. [1 ]
Fu H. [1 ]
机构：
[1] School of Mechatronics Engineering, Harbin Institute of Technology, Harbin
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2016年 / 22卷 / 08期
关键词：
Chatter recognition; Hidden Markov model; Open modular architecture controller; Spectrum estimation;
D O I：
10.13196/j.cims.2016.08.012
中图分类号：
学科分类号：
摘要：
To effectively identify the chatter in milling which had great influence on the quality of workpiece, the chatter recognition model based on Estimation of Signal Parameters via Rotational Invariance Techniques (ESPRIT) and Hidden Markov Model (HHM) was established. Frequency spectrum of cutting force signals which were collected through fixed cycle was estimated by using the method of ESPRIT. The cutting state in the process was determined by spectrum characteristic, and cutting force signals were labeled after the filtering of spindle rotation cycle. HHM parameter was trained by cutting force signals which had class labels, and the parameters of this chatter recognition model were obtained. To realize chatter recognition and monitoring of cutting state, PC based real-time acquisition and processing of cutting force signals were developed and integrated into Open Modular Architecture Controller (OMAC) of machine tool. The result of machining experiment showed that CNC system which integrated the function of measuring force could accurately determine the cutting state in the process of machining based on established model. © 2016, Editorial Department of CIMS. All right reserved.
引用
收藏
页码：1937 / 1944
页数：7
相关论文
共 14 条
  • [1] Altintas Y., Stepan G., Merdol D., Et al., Chatter stability of milling in frequency and discrete time domain, CIRP Journal of Manufacturing Science and Technology, 1, 1, pp. 5-44, (2008)
  • [2] Budak E., Altintas Y., Analytical prediction of chatter stability in milling-part I: general formulation, Journal of Dynamic Systems, Measurement, and Control, 120, 1, pp. 22-30, (1998)
  • [3] Altintas Y., Weck M., Chatter stability of metal cutting and grinding, CIRP Annals-Manufacturing Technology, 53, 2, pp. 619-642, (2004)
  • [4] Kuljanic E., Sortino M., Totis G., Multi sensor approaches for chatter detection in milling, Journal of Sound and Vibration, 312, 4-5, pp. 672-693, (2008)
  • [5] Kondo E., Ota H., Kawai T., A new method to detect regenerative chatter using spectral analysis, part 1: basic study on criteria for detection of chatter, Journal of Manufacturing Science and Engineering, 119, 4, pp. 461-466, (1997)
  • [6] Tangjitsitcharoen S., In-process monitoring and detection of chip formation and chatter for CNC turning, Journal of Materials Processing Technology, 209, 10, pp. 4682-4688, (2009)
  • [7] Kakinuma Y., Sudo Y., Aoyama T., Detection of chatter vibration in end milling applying disturbance observer, CIRP Annals-Manufacturing Technology, 60, 1, pp. 109-112, (2011)
  • [8] Wang L., Liang M., Chatter detection based on probability distribution of wavelet modulus maxima, Robotics and Computer-Integrated Manufacturing, 25, 6, pp. 989-998, (2009)
  • [9] Smith S., Tlusty J., Stabilizing chatter by automatic spindle speed regulation, CIRP Annals-Manufacturing Technology, 41, 1, pp. 433-436, (1992)
  • [10] Yao Z., Mei D., Chen Z., On-line chatter detection and identification based on wavelet and support vector machine, Journal of Materials Processing Technology, 201, 5, pp. 713-719, (2010)
12