Microstructure and mechanical behavior of polymer-derived in-situ ceramic reinforced lightweight aluminum matrix composite

被引：0
|
作者：
机构：
[1] [1,2,Pariyar, Abhishek
[2] Perugu, Chandra S.
[3] 2,Toth, Laszlo S.
[4] Kailas, Satish V.
来源：
Pariyar, Abhishek (abhishekp@iisc.ac.in) | 1600年 / Elsevier Ltd卷 / 880期
关键词：
Metal/alloy matrices have been previously reinforced with ceramic nanoparticles; but such reinforcements tend to agglomerate; have weak interfaces; and are expensive. Polymer-derived ceramics (PDCs) based composites can potentially overcome these shortcomings. These composites are obtained from the preceramic polymers after pyrolysis. These polymers are inexpensive; can be fragmented to the nanoscale; and pyrolyzed in-situ. Friction stir processing (FSP) was used to fragment and disperse the polymer within an Al-Mg alloy. The PDC particles pinned the dislocations and grain boundaries. The composite exhibited a microstructure resulting from dynamic recrystallization with an average grain size of ~1 µm. It also exhibited both high strength (96% and 24% improvement in the yield and tensile strength; respectively) and good ductility. Interestingly; the serrations in the tensile curves commonly observed in Al-Mg alloys due to the Portevin-Le Chatelier (PLC) effect was reduced in the composite. © 2021 Elsevier B.V;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [41] Preparation and mechanical properties of ZrO2-reinforced polymer-derived SiCNO composite ceramics
    Fei, Xuan
    Yu, Yuxi
    Yan, Yuangao
    Wei, Yongjin
    Zhao, Gang
    Huang, Liuying
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2024, 52 (04): : 34 - 42
  • [42] Polymer-Derived Lightweight SiBCN Ceramic Nanofibers with High Microwave Absorption Performance
    Chen, Qingqing
    Li, Daxin
    Liao, Xingqi
    Yang, Zhihua
    Jia, Dechang
    Zhou, Yu
    Riedel, Ralf
    ACS APPLIED MATERIALS & INTERFACES, 2021, 13 (29) : 34889 - 34898
  • [43] Correlation Between Intrinsic Microstructure and Piezoresistivity in a SiOC Polymer-Derived Ceramic
    Toma, Liviu
    Kleebe, Hans-Joachim
    Mueller, Mathis M.
    Janssen, Enrico
    Riedel, Ralf
    Melz, Tobias
    Hanselka, Holger
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (03) : 1056 - 1061
  • [44] Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC composite
    Kotani, M
    Inoue, T
    Kohyama, A
    Katoh, Y
    Okamura, K
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 357 (1-2): : 376 - 385
  • [45] Correlation between intrinsic microstructure and piezoresistivity in a SiOC polymer-derived ceramic
    Kleebe, H.-J. (kleebe@geo.tu-darmstadt.de), 1600, Blackwell Publishing Inc. (95):
  • [46] In Situ Laser Fabrication of Polymer-Derived Ceramic Composite Thin-Film Sensors for Harsh Environments
    Xu, Lida
    Cui, Zaifu
    Li, Lanlan
    He, Yingping
    Wu, Chao
    Chen, Guochun
    Li, Xin
    He, Gonghan
    Hai, Zhenyin
    Chen, Qinnan
    Sun, Daoheng
    ACS APPLIED MATERIALS & INTERFACES, 2022, 14 (10) : 12652 - 12661
  • [47] Mechanical properties and microstructure of in-situ TiCp reinforced aluminum base FGM by centrifugal cast
    Zhang, BS
    Zhu, JC
    Zhang, YJ
    Ying, ZD
    Cheng, HS
    An, GY
    FUNCTIONALLY GRADED MATERIALS 1996, 1997, : 179 - 184
  • [48] Microstructure and formation mechanism of in-situ α/β-sialon ceramic composite
    Cai Liao Ke Xue Yu Gong/Material Science and Technology, 1997, 5 (01):
  • [49] Aluminum matrix composite reinforced by in-situ formed intermetallic Al3Ti
    Zhao, YH
    Zhou, JE
    Yan, W
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2002, 12 (04) : 643 - 648
  • [50] Aluminum matrix composite reinforced by in-situ formed intermetallic Al3Ti
    赵玉厚
    周敬恩
    严文
    TransactionsofNonferrousMetalsSocietyofChina, 2002, (04) : 643 - 648
12345