Research Progress on Clinching Technologies for Metal-Polymer and Metal-Composite Thin-walled Structures

被引：0
作者：
Liu Y. [1 ]
Zhuang W. [2 ]
机构：
[1] School of Mechanical and Automotive Engineering, Qingdao University of Technology, Shandong, Qingdao
[2] State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun
来源：
Cailiao Daobao/Materials Reports | 2023年 / 37卷 / 03期
基金：
中国国家自然科学基金;
关键词：
fiber reinforced composite; forming quality; hybrid structures; mechanical clinching; polymer;
D O I：
10.11896/cldb.21110241
中图分类号：
学科分类号：
摘要：
With the demand of structural lightweight, metal-polymer and metal-composite thin-walled structures have been widely used in many fields such as transportation, aerospace and so on. Clinching has the advantages of high efficiency, energy saving, environmental friendliness and low cost, which provides a solution for the joining of dissimilar materials. Due to the poor ductility of polymer and its composite, to reduce the forming damage of joints, improve the joining efficiency and the mechanical properties of joints, some improved joining technologies have been proposed. In order to promote the engineering application of clinching, the clinching technologies of metal polymer and its composite thin-walled structures are reviewed, the applicability of each joining technology, forming process method, influencing factors of forming quality and mechanical properties of joints are discussed. Finally, aiming at the problems to be solved in the design of joining process, the research direction of clinching is prospected. © 2023 Cailiao Daobaoshe/ Materials Review. All rights reserved.
引用
收藏
相关论文
共 67 条
[1]  
Li Y B, Ma Y W, Lou M, Et al., Journal of Mechanical Engineering, 52, 24, (2016)
[2]  
Song Y L, Yang L, Guo W, Et al., Materials Reports A:Review Papers, 30, 9, (2016)
[3]  
Alshammari B A, Alsuhybani M S, Almushaikeh A M, Et al., Polymers, 13, 15, (2021)
[4]  
Xu X Z, Liu T, Wang W L, Et al., Acta Materiae Compositae Sinica, 36, 10, (2019)
[5]  
Li Y B, Ma Y W, Lou M, Et al., Journal of Mechanical Engineering, 56, 6, (2020)
[6]  
Qin G F, Na J X, Mu W L, Et al., Composites Part B-Engineering, 154, (2018)
[7]  
Mu W L, Na J X, Tan W, Et al., International Journal of Adhesion and Adhesives, 99, (2020)
[8]  
Pramanik A, Basak A K, Dong Y, Et al., Composites Part A-Applied Science and Manufacturing, 101, (2017)
[9]  
Liu Y, Zhuang W M, Xie D X., Materials Reports A: Review Papers, 34, 6, (2020)
[10]  
Liu Y, Zhuang W M., Thin-Walled Structures, 144, (2019)
1234567