Multi-response optimisation in ultrasonic machining of titanium using Taguchi's approach and utility concept

被引：16

作者：

Kumar J. ^{[1
]}

Khamba J.S. ^{[2
]}

机构：

[1] Department of Industrial Engineering and Management, National Institute of Technology, Kurukshetra, Haryana

[2] Department of Mechanical Engineering, University College of Engineering, Punjabi University, Patiala 147004, Punjab

来源：

International Journal of Manufacturing Research | 2010年 / 5卷 / 02期

关键词：

Design of experiments; Material removal rate; MRR; SR; Surface roughness; Taguchi method; Titanium; Tool wear rate; TWR; Ultrasonic machining; USM; Utility concept;

D O I：

10.1504/IJMR.2010.031629

中图分类号：

学科分类号：

摘要：

In this investigation, the effect of several parameters such as abrasive material, slurry grit size, tool material and ultrasonic power rating on the machining performance of Ultrasonic Machining (USM) has been evaluated using pure titanium (ASTM Grade-I) as work material. The machining characteristics that are being investigated are Material Removal Rate (MRR), Tool Wear Rate (TWR) and roughness of the machined surface. The study makes use of experimentation planned and executed as per Taguchi's robust design methodology. The results obtained have been analysed by using Analysis Of Variance (ANOVA) and relative significance of various factors has been evaluated. The information thus obtained has been used to construct a macro-model for USM of titanium. Multi-response optimisation was performed using Taguchi's method in conjunction with utility concept for simultaneous optimisation of the machining characteristics. Copyright © 2010 Inderscience Enterprises Ltd.

引用

页码：139 / 160

页数：21

共 26 条

[1]

Adithan M., Tool wear characteristics in ultrasonic drilling, Tribology International, 14, 6, pp. 351-356, (1981)

[2]

Barker T.B., Engineering Quality by Design: Interpreting the Taguchi Approach, pp. 78-82, (1990)

[3]

Benedict G.F., Non Traditional Manufacturing Processes, pp. 67-86, (1987)

[4]

Byrne D.M., Taguchi S., The Taguchi approach to parameter design, Quality Progress, 20, pp. 19-26, (1987)

[5]

Derek W.B., Analysis for Optimum Decisions, pp. 38-45, (1982)

[6]

Elsayed E.A., Chen A., Optimal levels of process parameters for products with multiple characteristics, International Journal of Production Research, 31, pp. 1117-1132, (1993)

[7]

Gupta V., Murthy P.N., An Introduction to Engineering Design Method, pp. 76-82, (1980)

[8]

Guzzo P.L., Shinohara A.H., Ultrasonic abrasion of quartz crystals, Wear, 255, pp. 132-145, (2003)

[9]

Jadoun R.S., Kumar P., Mishra B.K., Mehta R.C.S., Manufacturing process optimization for tool wear rate in ultrasonic drilling of engineering ceramics using the Taguchi method, International Journal of Machining and Machinability of Materials, 1, 1-2, pp. 94-114, (2006)

[10]

Kennedy D.C., Grieve R.J., Ultrasonic machining- A review, The Production Engineer, 54, 9, pp. 481-486, (1975)

← 1 2 3 →