Effect of combustion chamber's shape of CNG engine on air flow and combustion characteristic

被引：0

作者：

Jiang, Bing ^{[1
]}

Wu, Zhaohui ^{[1
]}

He, Yuntang ^{[2
]}

机构：

[1] Department of Mechanism and Electricity, Taiyuan University, Taiyuan

[2] China Automotive Technology and Research Center, Tianjin

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2015年 / 46卷 / 01期

关键词：

Air flow; CNG engine; Combustion; Combustion chamber;

D O I：

10.6041/j.issn.1000-1298.2015.01.047

中图分类号：

学科分类号：

摘要：

In order to improve character of combustion of CNG engine, basing on type 6105 turbine charge CNG engine, the air flow in the cylinder and its combustion characteristic affected by different combustion chamber's shape were simulated numerically. The result shows that the shape of combustion chamber plays an important role in the squish formation and combustion process. The contracted cave type combustion shape (chamber C) had much stronger squish and longer term period lasting compared with the others. The flame propagation velocity could be increased and the best combustion performance could be got. But the thermal load near igniter plug and the mass fraction of NOx produced during combustion in chamber C was higher. On the contrary, open cave type combustion (chamber B) had much weaker squish and slower flame propagation velocity. The worst combustion performance would be got. The situation of air flow in the cylinder and its combustion performance of vertical cave type combustion shape (chamber A) was between chamber C's and chamber B's. The suitable flame propagation velocity and good combustion performance could be got. And the thermal load near igniter plug and the mass fraction of NOx produced during combustion could be reduced. It was a suitable combustion chamber for CNG engine. ©, 2014, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：338 / 344

页数：6

共 23 条

[1]

Kalam M.A., Masjuki H.H., An experimental investigation of high performance natural gas engine with direct injection, Energy, 36, 5, pp. 3563-3571, (2011)

[2]

Shiga S., Ozone S., Machacon H.T.C., Et al., A study of the combustion and emission characteristics of compressed-natural-gas direct-injection stratified combustion using a rapid-compression-machine, Combustion and Flame, 129, 1-2, pp. 7-10, (2002)

[3]

Lin X., Huang Y., Yuan F., Effect of injection mode on flame propagation process and performance in GDI CNG engine, Transactions of CSICE, 30, 5, pp. 440-445, (2012)

[4]

Liu Y., Liu B., Liu L., Et al., Particulate emission and combustion characteristics of a direct injection natural gas engine under various injection and ignition timings, Journal of Xi'an Jiaotong University, 45, 5, pp. 12-16, (2011)

[5]

Liu Y., Liu B., Zeng K., Et al., Performance and emission characteristics of a direct-injection spark ignition hydrogen enriched natural gas engine diluted with EGR, Journal of Xi'an Jiaotong University, 45, 7, pp. 4-8, (2011)

[6]

Hu C., Hou S., Zhao W., Et al., Influence factors of combustion characteristics of a low pressure direct injection CNG engine, Journal of Combustion Science and Technology, 5, pp. 446-451, (2010)

[7]

Hu C., Zhao W., Liu N., Et al., Effects of ignition energy on combustion characterstics of low pressure CNG engine, Tractor & Farm Transporter, 37, 3, pp. 46-49, (2010)

[8]

Han X., Yao B., Zhang H., Et al., Influence of different ignition timing on cyclic variations in a CNG engine, Transactions of CSICE, 30, 5, pp. 446-450, (2012)

[9]

Jiao Y., Si P., Yang Z., Et al., Effect of intake port geometry on in-cylinder flow field and combustion in natural gas engine, Chinese Internal Combustion Engine Engineering, 34, 3, pp. 26-31, (2013)

[10]

Sun L., Liu Y., Zhou L., Et al., Cycle-by-cycle variations of a diesel pilot-ignited natural gas engine with exhaust gas recirculation, Journal of Xi'an Jiaotong University, 47, 3, pp. 36-41, (2013)

← 1 2 3 →