Preparation and properties of MOF-199@GO modified PVDF charged composite nanofiltration membrane

被引:0
作者
Ao D. [1 ,2 ]
Zhang H. [2 ]
Lyu M. [2 ]
Wang H. [1 ,2 ]
Chang N. [1 ,3 ]
机构
[1] State Key Laboratory of Separation Membranes and Membrane Processes, Tiangong University, Tianjin
[2] School of Environmental Science and Engineering, Tiangong University, Tianjin
[3] School of Chemistry and Chemical Engineering, Tiangong University, Tianjin
来源
Huagong Xuebao/CIESC Journal | 2020年 / 71卷
关键词
Composites; Desalination; Graphene oxide; Membranes; MOF-199; PVDF;
D O I
10.11949/0438-1157.20200277
中图分类号
学科分类号
摘要
As novel functional materials, metal-organic framework (MOF) and graphene oxide (GO) have received great attentions in recent years. In this work, MOF@GO nanocomposite (MOF-199@GO) is prepared by an in-situ growth method. A novel and highly efficient nanofiltration (NF) membrane can be facilely fabricated via surface decoration of MOF-199@GO onto poly(vinylidene fluoride) (PVDF) substrate before interfacial polymerization of m-phenylenediamine (MPD) and trimesoyl chloride (TMC) in order to overcome the hydrophobicity of PVDF membrane. The structure and morphology of MOF-199@GO and MOF-199@GO modified PVDF polyamide composite membrane are characterized by XRD, SEM, TEM, AFM and zeta potential. MOF-199@GO modified PVDF composite NF membrane which possesses dense and uniform polyamide thin-layer exhibits higher negative surface potential (up to ~37 mV) at pH 9.5. The performance of MOF-199@GO modified PVDF polyamide composite NF membrane has been investigated by determination of pure water flux and salt rejection. The prepared NF membrane MG3 exhibited highly efficient rejection of MgSO4, Na2SO4, NaCl and MgCl2, which are 93.56%, 93.04%, 87.48% and 87.11%, respectively. This work provides a worthy reference for designing highly efficient NF membranes modified by MOF and relevant materials. © 2020, Editorial Board of CIESC Journal. All right reserved.
引用
收藏
页码:297 / 305
页数:8
相关论文
共 33 条
  • [1] Gholami F, Zinadini S, Zinatizadeh A A, Et al., TMU-5 metal-organic frameworks (MOFs) as a novel nanofiller for flux increment and fouling mitigation in PES ultrafiltration membrane, Separation and Purification Technology, 194, pp. 272-280, (2018)
  • [2] Lee J Y, Tang C Y, Huo F W., Fabrication of porous matrix membrane (PMM) using metal-organic framework as green template for water treatment, Scientific Reports, 4, (2014)
  • [3] Huang J, Shu Z N, Zhang S H, Fabrication of high flux polyethersulfone nanofiltration membrane for dye concentration and desalination, CIESC Journal, 65, 10, pp. 3968-3975, (2014)
  • [4] Li S S, Gao X L, Wang Z, Et al., Preparation and characterization of quaternized chitosan/PS composite nanofiltration membrane, Membrane Science and Technology, 33, 3, pp. 44-48, (2013)
  • [5] Freger V., Nanoscale heterogeneity of polyamide membranes formed byinterfacial polymerization, Langmuir, 19, 11, pp. 4791-4797, (2003)
  • [6] Cai W B, Piao X L, Li J D, Et al., Solvent recovery performance of PDMS/PVDF composite nanofiltration membranes cured with different cross-linking reagents, CIESC Journal, 64, 2, pp. 581-589, (2013)
  • [7] Zhu Z Y, Bai C L, Wang L, Et al., Study on removal characteristics of organic dyes by tight GO/PVDF composite membranes, CIESC Journal, 70, 6, pp. 2361-2369, (2019)
  • [8] Wang K, Wang D W, Hou D Y, Et al., Fabrication of PVDF-SiO<sub>2</sub>/PVSQ superhydrophobic compositemembrane via self-assembly with anti-fouling property for membrane distillation, CIESC Journal, 70, 1, pp. 298-308, (2019)
  • [9] Lee J S, Lee H H, Seo J A, Et al., Interfacial polymerization on hydrophobic PVDF UF membranes surface: membrane wetting through pressurization, Applied Surface Science, 356, pp. 1207-1213, (2015)
  • [10] Jazmine A D M, Micah B M Y A, Bonifacio T D J, Et al., Application of cosolvent-assisted interfacial polymerization technique to fabricate thin-film composite polyamide pervaporation membranes with PVDF hollow fiber as support, Journal of Membrane Science, 564, pp. 722-731, (2018)