Recycling of permanent magnets: A perspective for application of organic acids and ionic liquids towards eco-friendly process

被引:3
作者
Petraglia, Fernanda Fajardo Nacif [1 ]
Vinhal, Jonathan Tenorio [2 ]
Botelho Junior, Amilton Barbosa [3 ]
Espinosa, Denise Crocce Romano [1 ]
机构
[1] Univ Sao Paulo, Dept Chem Engn, Polytech Sch, Rua Lago 250-2 Andar, BR-05508080 Sao Paulo, Brazil
[2] IFP Energies Nouvelles, Rond Point Echangeur Solaize, BP3, F-69360 Solaize, France
[3] MIT, Dept Mat Sci & Engn, Cambridge, MA USA
来源
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING | 2024年 / 12卷 / 06期
基金
巴西圣保罗研究基金会; 瑞典研究理事会;
关键词
Ionic liquids; Organic acids; Purification; Leaching; Neodymium magnets; RARE-EARTH-ELEMENTS; LIFE-CYCLE ASSESSMENT; SOLVENT-EXTRACTION; NDFEB MAGNETS; LEACHING KINETICS; NEODYMIUM; RECOVERY; WASTE; SEPARATION; ND;
D O I
10.1016/j.jece.2024.114389
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Neodymium is a crucial element for low-carbon technologies with rising search for new sources due to short-term supply interruption risk. Electronic wastes as secondary sources represent a potential with less environmental impact. However, current technologies face challenges as the development of new gadgets released every year and complexity. Conventional hydrometallurgical routes use inorganic acids and organic extractants. Regardless of completely recovering metals, they are harmful reagents for the environment. Despite this, organic acids (OA) and ionic liquids (IL) are investigated as alternatives to these hydrometallurgical processes. OAs/ILs have the potential to reach eco-friendly routes due to their ability to reduce greenhouse gas emissions significantly. This perspective envisions the recycling of permanent magnets for neodymium recovery using OA and ILs. The current approaches and literature regarding OA/ILs, technical efficiencies in a lab, and pilot scale were analyzed. This approach addressed the technical, economic, and environmental analysis demonstrating OA and IL's great potential to recover rare earth elements.
引用
收藏
页数:10
相关论文
共 120 条
[1]   Comparative life cycle assessment of the use of an ionic liquid ([Bmim]Br) versus a volatile organic solvent in the production of acetylsalicylic acid [J].
Amado Alviz, Patricia Lucia ;
Alvarez, Alejandro J. .
JOURNAL OF CLEANER PRODUCTION, 2017, 168 :1614-1624
[2]   Inventory of biodegradation data of ionic liquids [J].
Amsel, Ann-Kathrin ;
Olsson, Oliver ;
Kummerer, Klaus .
CHEMOSPHERE, 2022, 299
[3]  
[Anonymous], 2014, REPORT CRITICAL RAW, DOI DOI 10.2772/33515
[4]  
[Anonymous], 2017, 2017 List Crit. Raw Mater. EU
[5]   The Role of Renewable Energies for the Sustainable Energy Governance and Environmental Policies for the Mitigation of Climate Change in Ecuador [J].
Arroyo M, Flavio R. ;
Miguel, Luis J. .
ENERGIES, 2020, 13 (15)
[6]   Efficient recovery of neodymium and praseodymium from NdFeB magnet-leaching phase with and without ionic liquid as a carrier in the supported liquid membrane [J].
Asadollahzadeh, Mehdi ;
Torkaman, Rezvan ;
Torab-Mostaedi, Meisam ;
Hemmati, Alireza ;
Ghaemi, Ahad .
CHEMICAL PAPERS, 2020, 74 (12) :4193-4201
[7]   Fenton and photo-assisted advanced oxidative degradation of ionic liquids: a review [J].
Ashtaputrey, Santosh D. ;
Agrawal, Pratibha S. .
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2023, 30 (47) :103576-103601
[8]   Synthesis of imidazolium and pyridinium-based ionic liquids and application of 1-alkyl-3-methylimidazolium salts as pre-catalysts for the benzoin condensation using solvent-free and microwave activation [J].
Aupoix, Audrey ;
Pegot, Bruce ;
Vo-Thanh, Giang .
TETRAHEDRON, 2010, 66 (06) :1352-1356
[9]   Uncovering the True Cost of Ionic Liquids using Monetization [J].
Baaqel, Husain ;
Tulus, Victor ;
Chachuat, Benoit ;
Guillen-Gosalbez, Gonzalo ;
Hallett, Jason .
30TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, PTS A-C, 2020, 48 :1825-1830
[10]   Ultrasound and Microwave assisted leaching of neodymium from waste magnet using organic solvent [J].
Behera, S. S. ;
Panda, Subhendu K. ;
Mandal, D. ;
Parhi, P. K. .
HYDROMETALLURGY, 2019, 185 :61-70