Preparation of Polypropylene Grafted with Bi-Monomer Maleic Anhydride/N-Vinyl Pyrrolidone and Hydrophilic Modification of Polypropylene Microporous Membrane

被引：0
作者：
Xia Y. [1 ]
Ji B. [2 ]
Chen H. [1 ]
Ma W. [1 ]
Cao Z. [1 ]
Tao G. [1 ]
机构：
[1] Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Changzhou University, Changzhou
[2] Jiangsu Qiyi Technology Co. LTD, Danyang
来源：
Xia, Yanping (xiayanping0715@126.com) | 2018年 / Sichuan University卷 / 34期
关键词：
Hydrophilic microporous membrane; Maleicanhydride; Modifier; N-vinyl pyrrolidone; Polypropylene;
D O I：
10.16865/j.cnki.1000-7555.2018.09.022
中图分类号：
学科分类号：
摘要：
An amphiphilic polypropylene-g-poly[maleicanhydride-co-vinylpyrrolidone] (PP-g-(MAH-co-NVP)) modifier was prepared by melt grafting polymerization using maleicanhydride (MAH) as grafting monomer and N-vinyl pyrrolidone (NVP) as comonomer. And hydrophilic microporous membrane comprising PP and PP-g-(MAH-co-NVP) was prepared via thermally induced phase separation method. The chemical structure and grafting degree (GD) of PP-g-(MAH-co-NVP) were determined by FT-IR and elemental analysis. Crystallization property and rheological behavior of modifier were investigated by DSC, XRD. Contact angle measurement, TGA, SEM and porosity analysis were used to study the effect of hydrophilic modification on PP membranes. The results show that hydrophilic branched chains are grafted onto PP macromolecular chains successfully; the GD of MAH is increased by 270% when the mole ratio of MAH/NVP is 1/1. And the crystallization of PP is accelerated by the addition of the second monomer NVP. Thermostability, pore number and porosity of modified membranes are better than those of the pure PP membrane. The hydrophilicity of modified PP microporous membrane is significantly improved and the contact angle decreases by 28.5%. © 2018, Editorial Board of Polymer Materials Science & Engineering. All right reserved.
引用
收藏
页码：132 / 138
页数：6
相关论文
共 13 条
  • [1] Heiner S., Baker R.W., Membrane technology and applications, J. Membr. Sci., 246, pp. 113-114, (2005)
  • [2] Yang Y.F., Wan L.S., Xu Z.K., Surface engineering of microporous polypropylene membrane for antifouling: a mini-review, Adhes. Sci. Technol., 25, pp. 245-260, (2010)
  • [3] Fang Y., Xu Z.K., Wu J., Surface modification of membranes, Encyclopedia of Membrane Science and Technology, pp. 1-15, (2003)
  • [4] Ren W., Jiang X.H., Yu Q., Surface roughness of fused deposition modeling based on micro-extrusion: a review, Polymer Materials Science & Engineering, 33, 4, pp. 114-120, (2017)
  • [5] Amir S., Pierre J.C., Abdellah A., Et al., Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA, J. Membr. Sci., 462, pp. 50-61, (2014)
  • [6] Jin J., Zhang C., Jiang W., Melting grafting polypropylene with hydrophilic monomers for improving hemocompatibility, Colloids Surf., A, 407, pp. 141-149, (2012)
  • [7] Ma W.Z., Chen J.S., Zhang J., Et al., Membrane formation of poly (vinylidene fluoride)/poly(methyl methacrylate)/diluents via thermally induced phase separation, J. Appl. Polym. Sci., 111, pp. 1235-1245, (2013)
  • [8] Martin S.J., Mcbrierty V.J., Douglass D.C., Comparison of real-time monitoring of copolymer formation and composition by NMR, FT-IR, and numerical simulation, Macromolecules, 34, pp. 8934-8943, (2001)
  • [9] Chen H.J., Zhu Y.F., Zhang Y., Et al., Synthesis and characterization of a micromolecular surface modifier for polypropylene, Acta Polymerica Sinica, 2, pp. 203-208, (2007)
  • [10] Chi X.M., You H.Y., Kuang J.J., Et al., Preparation of PP-g-MAH and its application in PP thermosol, Plastics Science and Technology, 38, 11, pp. 59-64, (2010)
12