The gas sensing properties of zinc stannates prepared by self-propagating high-temperature synthesis

被引:0
|
作者
机构
[1] Materials Chemistry Research Center, Department of Chemistry, University College London, London
[2] All-Russian Research Institute on Problems of Civil Defence, Emergencies of Emergency Control Ministry of Russia (EMERCOM), Moscow
[3] School of Engineering and Materials Sciences, Queen Mary, University of London, London
来源
Binions, Russell | 1600年 / American Scientific Publishers卷 / 12期
关键词
Gas sensors; Microstructure; Semiconductor; SHS; Thick films; Zinc stannate;
D O I
10.1166/sl.2014.3342
中图分类号
学科分类号
摘要
The gas-sensing properties of cubic nickel-zinc stannates Zn2-xNixSnO4(with x = 0, 0.8) prepared by self-propagating high-temperature synthesis (SHS) are reported. This is the first report of using such an SHS derived powder for gas sensing applications. The gas response of the materials was investigated against a range of gases (ethanol, ammonia, propane, CO, ethane, ethene) at a variety of operating temperatures. Good gas response behavior was found in the case of the cubic nickelzinc stannates with excellent selectivity towards ethanol. It was found that a response of 9 towards 20 ethanol could be obtained, more than twice the response to other environmentally important gases that were tested. Copyright © 2014 American Scientific Publishers
引用
收藏
页码:1567 / 1671
页数:104
相关论文
共 50 条
  • [41] Investigation on self-propagating high-temperature synthesis of TiAl intermetallic compound
    Wang, WM
    Xu, M
    Mei, BC
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 1995, 10 (03): : 1 - 5
  • [42] Laser induced self-propagating high-temperature synthesis of TiNi alloy
    杨永强
    张翠红
    杨云飞
    陈林
    ChineseOpticsLetters, 2005, (01) : 35 - 37
  • [43] Experimental Study on Igniting Self-propagating High-temperature Synthesis by Laser
    CHEN Senchang SHI Yusheng HUANG Shuhuai (College of Material Science and Engineering of Huazhong University of Sci. & Tech.
    Chinese Journal of Lasers, 2002, (01) : 67 - 73
  • [44] Investigation of the Effect of Magnesium on the Microstructure and Mechanical Properties of NiTi Shape Memory Alloy Prepared by Self-Propagating High-Temperature Synthesis
    Skolakova, Andrea
    Novak, Pavel
    Salvetr, Pavel
    Moravec, Hynek
    Sefl, Vaclav
    Deduytsche, Davy
    Detavernier, Christophe
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (07): : 3559 - 3569
  • [45] Thermoelectric Properties of Al(1–x)MnSi(1+x) Alloy Prepared by Self-Propagating High-Temperature Synthesis
    A. O. Sivakova
    A. V. Karpov
    P. A. Lazarev
    A. E. Sytschev
    International Journal of Self-Propagating High-Temperature Synthesis, 2025, 34 (1) : 71 - 75
  • [46] OPTICAL PROPERTIES OF POWDER AND CERAMICS OF ALUMINIUM OXYNITRIDE OBTAINED BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
    Akopdzhanyan, T. G.
    Kondakov, A. A.
    Rupasov, S. I.
    Kozlova, A. P.
    Pankratov, V.
    LITHUANIAN JOURNAL OF PHYSICS, 2021, 61 (03): : 169 - 176
  • [47] Plasticity of Porous NiTi Alloys Obtained by Self-propagating High-temperature Synthesis in Closed and Open Gas Flow Reactors
    Marchenko, Ekaterina S.
    Yasenchuk, Yuri F.
    Mamazakirov, Oibek
    Klopotov, Anatoly A.
    Baigonakova, Gulsharat A.
    Volinsky, Alex A.
    Gunter, Sergey V.
    MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (06) : 659 - 667
  • [48] GAS-DYNAMIC MODEL OF THE FORMATION OF OPEN AND CLOSED POROSITY IN SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS
    Uvarov, V. I.
    Borovinskaya, I. P.
    Lukin, E. S.
    GLASS AND CERAMICS, 2011, 67 (11-12) : 377 - 379
  • [49] Gas-dynamic model of the formation of open and closed porosity in self-propagating high-temperature synthesis
    V. I. Uvarov
    I. P. Borovinskaya
    E. S. Lukin
    Glass and Ceramics, 2011, 67 : 377 - 379
  • [50] Synthesis and characterization of multipod zinc oxide whiskers synthesized via a modified self-propagating high-temperature synthesis method
    Peng, Cheng-Hsiung
    Chang, Ching-Chih
    Hwang, Chyi-Ching
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 511 (01) : L1 - L5