Sand control and supporting process in viscous oil recovery by steam injection in Gudong oilfield

被引：0
|
作者：
Liu, Y. [1 ]
Peng, B. [1 ]
Wang, G. [1 ]
Zhou, C. [1 ]
Yi, X. [1 ]
Wei, Z. [1 ]
Qu, X. [1 ]
机构：
[1] Shengli Oilfield Branch Company, SINOPEC, Dongying 257231, China
来源：
Jianghan Shiyou Xueyuan Xuebao/Journal of Jianghan Petroleum Institute | 2001年 / 23卷 / 03期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The geologic characteristics of viscous oil blocks and the problems of sand control in production by cyclic steam injection are studied analytically, a set of sand control and its support processes are optimized, which are suitable for producting by steam injection in the viscous oil block of Gudong oilfield. Field application shows that a combined sand control method constituted by coated sand with metallic cotton sand filter tube is appropriate for viscous oil production by cyclic steam injecting in loose sandstone reservoirs of the oilfield, which is of high success rate and long effective period; a through pump electric heating process is used after the steam injection, to improve the effect of viscous oil recovery and lengthen the steam injecting cycle, optimizing perforating process and pretreatment of antiswelling are effective measures for promoting success rate of sand control in loose argillaceous sandstone reservoirs.
引用
收藏
页码：40 / 41
相关论文
共 50 条
  • [1] RECOVERY OF OIL FROM OIL SAND BY STEAM INJECTION.
    Yamasaki, Toyohiko
    Hashimoto, Akira
    Waseda Daigaku Rikogaku Kenkyusho Hokoku/Bulletin of Science and Engineering Research Laboratory,, 1982, (98): : 59 - 65
  • [2] Developing Sand-Gravel Viscous Oil Reservoir in Le'an Oilfield
    He Shenghou (Vice Chief Engineer
    China Oil & Gas, 1995, (02) : 34 - 35
  • [3] Simulation of Steam Injection Process for Horizontal Well with Heavy Oil Recovery
    Guo, Chun-sheng
    Qu, Fang-yi
    Liu, Yong
    Niu, Jing-ran
    Zou, Yong
    HEAT TRANSFER ENGINEERING, 2018, 39 (13-14) : 1283 - 1295
  • [4] Experimental study of the steam distillation mechanism during the steam injection process for heavy oil recovery
    Liu, Pengcheng
    Yuan, Zhe
    Zhang, Shengfei
    Xu, Zhenhua
    Li, Xiuluan
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2018, 166 : 561 - 567
  • [5] Emulsification and improved oil recovery with viscosity reducer during steam injection process for heavy oil
    Wu, Zhengbin
    Liu Huiqing
    Wang, Xue
    Zhang, Zequan
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2018, 61 : 348 - 355
  • [6] LABORATORY STUDIES OF OIL RECOVERY BY STEAM INJECTION
    WILLMAN, BT
    VALLEROY, VV
    RUNBERG, GW
    CORNELIUS, AJ
    POWERS, LW
    TRANSACTIONS OF THE SOCIETY OF PETROLEUM ENGINEERS OF AIME, 1961, 222 (07): : 681 - 690
  • [7] RECOVERY OF BITUMEN FROM OIL SAND BY STEAM WITH CHEMICALS
    Yamazaki, T.
    Matsuzawa, N.
    Abdelkarim, O.
    Ono, Y.
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 1989, 3 (1-2) : 147 - 159
  • [8] Geomechanical modeling in thermal heavy oil recovery process: Effect of steam injection on the caprock
    Guy, N.
    Vincke, O.
    Computer Methods and Recent Advances in Geomechanics, 2015, : 1741 - 1745
  • [9] Experimental Investigation of In-Situ Emulsion Formation To Improve Viscous-Oil Recovery in Steam-Injection Process Assisted by Viscosity Reducer
    Lu, Chuan
    Liu, Huiqing
    Zhao, Wei
    Lu, Keqin
    Liu, Yongge
    Tian, Ji
    Tan, Xianhong
    SPE JOURNAL, 2017, 22 (01): : 130 - 137
  • [10] Stress distribution in an athabasca oil sand in response to the injection of steam
    1659, Publ by A.A. Balkema, Rotterdam, Neth
12345