Improved analytical model for surface-mounted PM motors considering slotting effects and armature reaction

被引：16

作者：

Lubin T. ^{[1
]}

Mezani S. ^{[1
]}

Rezzoug A. ^{[1
]}

机构：

[1] Groupe de Recherche en Electrotechnique et Electronique de Nancy (GREEN), University Henri Poincaré

来源：

Progress In Electromagnetics Research B | 2010年 / 25期

关键词：

All Open Access; Bronze; Green;

D O I：

10.2528/PIERB10081209

中图分类号：

学科分类号：

摘要：

This paper presents an exact analytical method for the computation of the magneticfield distribution in surface-mounted permanent-magnet (PM) motors for any pole and slot combinations including fractional slot machines. The proposed model takes into account the slotting effect and the armature reaction magnetic field. The analytical method is based on the resolution of the two-dimensional Laplace's and Poisson's equations in polar coordinates (by the separation of variables technique) for each subdomain, i.e., magnet, airgap and slots. Magnetic field distributions, back electromotive force and electromagnetic torque (cogging torque and load torque) computed with the proposed analytical method are verified with those obtained from finite element analyses.

引用

页码：293 / 314

页数：21

共 20 条

[1]

Farlow S.J., Partial Differential Equations for Scientists and Engineers, 414, (1993)

[2]

Sargos F.M., Rezzoug A., Analytical calculation of airgap magnetic field produced by inset permanent magnet rotor machine, J. Physics III, 1, pp. 103-110, (1990)

[3]

Zhu Z.Q., Howe D., Instantaneous magnetic-field distribution in brushless permanent-magnet dc motor, part III: Effect of slotting, IEEE Trans. Magn., 29, pp. 143-151, (1993)

[4]

Zarko D., Ban D., Lipo T.A., Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance, IEEE Trans. Magn., 42, 7, pp. 1828-1837, (2006)

[5]

Markovic M., Jufer M., Perriard Y., Reducing the cogging torque in brushless dc motors by using conformal mappings, IEEE Trans. Magn., 40, 2, pp. 451-455, (2004)

[6]

Boughrara K., Zarko D., Ibtiouen R., Touhami O., Rezzoug A., Magnetic field analysis of inset and surface-mounted permanent-magnet synchronous motor using Schwarz-Christoffel transformation, IEEE Trans. Magn., 45, 8, pp. 3166-3168, (2009)

[7]

Ackermann B., Sottek R., Analytical modeling of the cogging torque in permanent magnet motors, Elect. Eng., 78, 2, pp. 117-125, (1994)

[8]

Zhu Z.Q., Howe D., Instantaneous magnetic field distribution in brushless permanent magnet dc motors, part II: Armature-reaction field, IEEE Trans. Magn., 29, 1, pp. 136-142, (1993)

[9]

Wang X., Li Q., Wang S., Li Q., Analytical calculation of air-gap magnetic field distribution and instantaneous charac- teristics of brushless dc motors, IEEE Trans. Energy. Convers., 18, 3, pp. 424-432, (2003)

[10]

Proca A.B., Keyhani A., El-Antably A., Lu W., Dai M., Analytical model for permanent magnet motors with surface mounted magnets, IEEE Trans. Energy Convers., 18, 3, pp. 386-391, (2003)

← 1 2 →