Hydrodynamics of the water wall in a 600 mw supercritical circulating fluidized bed boiler with water cooled panels within the furnace

被引:0
|
作者
Key Laboratory for Thermal Science and Power Engineering, Tsinghua University, Haidian District, Beijing 100084, China [1 ]
不详 [2 ]
机构
来源
Zhongguo Dianji Gongcheng Xuebao | 2008年 / 29卷 / 1-5期
关键词
Pulverized fuel fired boilers - Fluidized bed combustion - Cooling water - Fluidized bed process - Fluidized beds - Mass transfer;
D O I
暂无
中图分类号
学科分类号
摘要
The hydrodynamics of the water wall in a 600 MW circulating fluidized bed (CFB) boiler was studied, and water cooled panels were deposited in the furnace. The mass flow rate and the temperature distribution of the water wall with throttles within the smooth tubes was discussed. It was found that the outlet temperature of water wall is less than 422 °C, when the mass flow rate is below 1000kg/(m2 ·s) at the load of 100% boiler maximum continuous rating (B-MCR). And heat difference can be controlled within 2%. At the load of 75% turbine heat acceptance (THA) or 50%THA, the wall temperature is also not too high to be allowed. Compared with the ribbed-tube, the usage of them can reduce the water wall temperature but no good to the heat deviation. Smooth tube with throttle is better than ribbed tube in the 600 MW supercritical CFB boiler.
引用
收藏
页码:1 / 5
相关论文
共 50 条
  • [1] Heat transfer in a 600 MWe supercritical circulating fluidized bed boiler with water cooled wall panels
    Li, Yan
    Li, Wenkai
    Wu, Yuxin
    Yang, Hairui
    Nie, Li
    Huo, Suoshan
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2009, 49 (02): : 244 - 248
  • [2] 600 MW supercritical circulating fluidized bed boiler
    Lu, Jun-Fu
    Yu, Long
    Zhang, Yan-Jun
    Yue, Guang-Xi
    Li, Zhen-Yu
    Wu, Yu-Xin
    Dongli Gongcheng/Power Engineering, 2007, 27 (04): : 497 - 501
  • [3] Design of 600MW supercritical circulating fluidized bed boiler
    Dongfang boiler Co. Ltd., Zigong 643001, China
    Dongli Gongcheng, 2008, 5 (701-706):
  • [4] A hybrid simulation of a 600 MW supercritical circulating fluidized bed boiler system
    Wu, Haochuang
    Yang, Chen
    He, Hangxing
    Huang, Shanglong
    Chen, Hao
    APPLIED THERMAL ENGINEERING, 2018, 143 : 977 - 987
  • [5] Thermal-hydraulic calculation and analysis of a 600 MW supercritical circulating fluidized bed boiler with annular furnace
    Wang, Long
    Yang, Dong
    Shen, Zhi
    Mao, Kaiyuan
    Long, Jun
    APPLIED THERMAL ENGINEERING, 2016, 95 : 42 - 52
  • [6] Heat flux distribution on circulating fluidized bed boiler water wall
    Lu J.
    Yu L.
    Yue G.
    Yang H.
    Zhang J.
    Zhang M.
    Yang Z.
    Frontiers of Energy and Power Engineering in China, 2008, 2 (2): : 134 - 139
  • [7] Experimental Study on the Heat-Transfer Characteristics of a 600 MW Supercritical Circulating Fluidized Bed Boiler
    Chen, Ye
    Lu, Xiaofeng
    Zhang, Wenqing
    Wang, Quanhai
    Chen, Sida
    Xu, Jie
    Yang, Yu
    Li, Jianbo
    ENERGY & FUELS, 2018, 32 (01) : 1 - 9
  • [8] Measurement of Thinned Water-Cooled Wall in a Circulating Fluidized Bed Boiler Using Ultrasonic and Magnetic Methods
    Lee, Jinyi
    Choe, Eunho
    Pham, Cong-Thuong
    Le, Minhhuy
    APPLIED SCIENCES-BASEL, 2021, 11 (06):
  • [9] Temperature distributions in a finned water wall tube of a circulating fluidized bed boiler
    Cheng, Le-Ming
    Shi, Zheng-Lun
    Luo, Zhong-Yang
    Basu, Prabir
    Dongli Gongcheng/Power Engineering, 2002, 22 (02):
  • [10] Experimental and numerical study on density wave oscillations of supercritical water in parallel water wall channels of an ultra-supercritical circulating fluidized bed boiler
    Wang, Wenyu
    Yang, Dong
    Dong, Le
    Li, Juan
    Zhou, Xihong
    Pan, Wenxiao
    APPLIED THERMAL ENGINEERING, 2020, 165