Fabrication of micro lens array by UV-LED lithography

被引：0
|
作者：
Iguchi, Yusuke [1 ]
Matsumoto, Yoshinori [1 ]
机构：
[1] Faculty of Science and Technology, Department of Applied Physics and Physico-informatics, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama-shi, Kanagawa 223-8522, Japan
来源：
IEEJ Transactions on Sensors and Micromachines | 2009年 / 129卷 / 10期
关键词：
Microlenses - Glass substrates - Light emitting diodes - Nanoimprint lithography - Molds;
D O I：
10.1541/ieejsmas.129.363
中图分类号：
学科分类号：
摘要：
High curvature micro lens array of 240-570 μm diameters and 110-270 μm heights has been fabricated by using UV-LED lithography and imprinting technique. Curved SU-8 structures were fabricated by backside exposure through thin glass substrate because UV-LED array light source has wide directivity characteristics of UV dose. The structure was transferred to Polydimethylsiloxsane (PDMS) mold. Micro lens array of photosensitive acrylic resin was fabricated by using the mold. © 2009 The Institute of Electrical Engineers of Japan.
引用
收藏
页码：363 / 364
相关论文
共 50 条
  • [21] Fabrication of a pyramidal micro-needle array structure using 3D micro-lens mask lithography
    Tsung-Hung Lin
    Jhih-Min Jiang
    Microsystem Technologies, 2019, 25 : 4637 - 4643
  • [22] Fabrication of long hexagonal micro-lens array by applying gray-scale lithography in micro-replication process
    Yang, Jauh-Jung
    Liao, Yunn-Shiuan
    Chen, Chi-Feng
    OPTICS COMMUNICATIONS, 2007, 270 (02) : 433 - 440
  • [23] Fabrication of a pyramidal micro-needle array structure using 3D micro-lens mask lithography
    Lin, Tsung-Hung
    Jiang, Jhih-Min
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2019, 25 (12): : 4637 - 4643
  • [24] The design of UV-LED Control System
    Tao, Mi
    JinyaoLi
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND INTELLIGENT SYSTEMS (ICMEIS 2015), 2015, 26 : 1010 - 1013
  • [25] Multidirectional UV-LED lithography using an array of high-intensity UV-LEDs and tilt-rotational sample holder for 3-D microfabrication
    Sabera Fahmida Shiba
    Jun Ying Tan
    Jungkwun Kim
    Micro and Nano Systems Letters, 8
  • [26] Multidirectional UV-LED lithography using an array of high-intensity UV-LEDs and tilt-rotational sample holder for 3-D microfabrication
    Shiba, Sabera Fahmida
    Tan, Jun Ying
    Kim, Jungkwun
    MICRO AND NANO SYSTEMS LETTERS, 2020, 8 (01)
  • [27] Supercritical lens array in a centimeter scale patterned with maskless UV lithography
    Zhu, Xufeng
    Fang, Wei
    Lei, Jian
    Li, Zhangyin
    Xie, Fei
    Cao, Yaoyu
    Zhang, Yaping
    Qin, Fei
    Li, Xiangping
    OPTICS LETTERS, 2020, 45 (07) : 1798 - 1801
  • [28] Fabrication of Micro Lens Array by Excimer Laser Micromachining
    Akhtar, Syed Nadeem
    Sharma, Shashank
    Ramkumar, J.
    LASERS BASED MANUFACTURING, 2015, : 201 - 220
  • [29] Fabrication of micro-lens array with antireflection structure
    Nakamura, Masato
    Mano, Ichiro
    Taniguchi, Jun
    MICROELECTRONIC ENGINEERING, 2019, 211 : 29 - 36
  • [30] Fabrication of gapless triangular micro-lens array
    Pan, C. T.
    Su, C. H.
    SENSORS AND ACTUATORS A-PHYSICAL, 2007, 134 (02) : 631 - 640
12345