Fuzzy pi controller for no-load cutting-in control of doubly fed induction generator in wind power system

被引:0
作者
Chen, Wei [1 ]
Xiao, Dan [1 ]
Wang, Huimin [1 ]
Song, Zhanfeng [1 ]
Xia, Changliang [1 ]
机构
[1] School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072, China
来源
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2009年 / 30卷 / 06期
关键词
Controllers - Vector control (Electric machinery) - Electric power generation - Power control - Asynchronous generators - Electric power system control - Electric fault currents - Wind power - Robustness (control systems);
D O I
暂无
中图分类号
学科分类号
摘要
Based on stator field-oriented vector control technique and cutting-in operational mechanism, a new fuzzy PI controller for no-load cutting-in control scheme of doubly fed induction generator (DFIG) in wind power system was proposed. By these, the fuzzy PI controller for investigation of no-load cutting-in range of DFIG in wind-power system was presented, comparing with fuzzy controller and PI controller. The results show that fuzzy PI controller produces rapidly dynamic response and highly steady precision, and ensures strongest robustness under variable grid voltage conditions and variable DFIG parameters conditions. The whole cutting-in transitional course is transient. Therefore fuzzy PI controller behaves excellent cutting-in capability with both the excellence of rapidly dynamic response and strong robustness of fuzzy controller and highly steady precision of PI controller for no-load cutting-in control scheme.
引用
收藏
页码:794 / 798
相关论文
共 50 条
[41]   Cutting-in control of the variable speed constant frequency wind power generator based on internal model controller [J].
Guo Jindong ;
Xu Honghua ;
Zhao Dongli .
PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V, 2007, :2287-2291
[42]   Novel sliding mode controller for power control of a doubly fed induction generator in variable speed wind turbine [J].
Leily, Mersad Ravand Lat ;
Tohidi, Sajjad ;
Hashemzadeh, Farzad ;
Shotorbani, Amin Mohammadpour .
2019 IRANIAN CONFERENCE ON RENEWABLE ENERGY & DISTRIBUTED GENERATION (ICREDG), 2019,
[43]   Nonlinear control of the doubly-fed induction generator in wind power systems [J].
Soares, Orlando ;
Goncalves, Henrique ;
Martins, Antonio ;
Carvalho, Adriano .
RENEWABLE ENERGY, 2010, 35 (08) :1662-1670
[44]   High-order sliding mode control for no-load cutting-in of DFIG wind turbines [J].
Zheng, Xuemei ;
Guo, Ling ;
Xu, Dianguo ;
Wang, Wei .
Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2012, 36 (07) :12-16
[45]   Direct power control of a wind turbine based on doubly fed induction generator [J].
Yaichi I. ;
Semmah A. ;
Wira P. .
European Journal of Electrical Engineering, 2019, 21 (05) :457-464
[46]   Reactive Power Analysis and Control of Doubly Fed Induction Generator Wind Farm [J].
Xu, Dianguo ;
Li, Rui ;
Liu, Yicheng ;
Lang, Yongqiang .
EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9, 2009, :921-930
[47]   ACTIVE AND REACTIVE POWER CONTROL OF A DOUBLY FED INDUCTION GENERATOR FOR WIND APPLICATIONS [J].
Nait-kaci, Brahim ;
Doumbia, Mamadou L. ;
Agbossou, Kodjo ;
Yousif, Abdelrahman .
EUROCON 2009: INTERNATIONAL IEEE CONFERENCE DEVOTED TO THE 150 ANNIVERSARY OF ALEXANDER S. POPOV, VOLS 1- 4, PROCEEDINGS, 2009, :2034-+
[48]   System Modeling and Simulation of a Wind Power Generation with Doubly Fed Induction Generator [J].
Shi, Yun ;
Liu, Ai ;
Lin, Chengwu .
PROCEEDINGS OF THE6TH INTERNATIONAL CONFERENCE ON MECHATRONICS, MATERIALS, BIOTECHNOLOGY AND ENVIRONMENT (ICMMBE 2016), 2016, 83 :148-152
[49]   Fuzzy sliding mode control applied to a doubly fed induction generator for wind turbines [J].
Ardjoun, Sid Ahmed El Mehdi ;
Abid, Mohamed .
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES, 2015, 23 (06) :1673-1686
[50]   Stochastic distribution controller for wind turbines with doubly fed induction generator [J].
Munisamy V. ;
Vadivoo N.S. ;
Devasena V. .
Distributed Generation and Alternative Energy Journal, 2020, 35 (04) :307-330