Fuzzy pi controller for no-load cutting-in control of doubly fed induction generator in wind power system

被引:0
作者
Chen, Wei [1 ]
Xiao, Dan [1 ]
Wang, Huimin [1 ]
Song, Zhanfeng [1 ]
Xia, Changliang [1 ]
机构
[1] School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072, China
来源
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2009年 / 30卷 / 06期
关键词
Controllers - Vector control (Electric machinery) - Electric power generation - Power control - Asynchronous generators - Electric power system control - Electric fault currents - Wind power - Robustness (control systems);
D O I
暂无
中图分类号
学科分类号
摘要
Based on stator field-oriented vector control technique and cutting-in operational mechanism, a new fuzzy PI controller for no-load cutting-in control scheme of doubly fed induction generator (DFIG) in wind power system was proposed. By these, the fuzzy PI controller for investigation of no-load cutting-in range of DFIG in wind-power system was presented, comparing with fuzzy controller and PI controller. The results show that fuzzy PI controller produces rapidly dynamic response and highly steady precision, and ensures strongest robustness under variable grid voltage conditions and variable DFIG parameters conditions. The whole cutting-in transitional course is transient. Therefore fuzzy PI controller behaves excellent cutting-in capability with both the excellence of rapidly dynamic response and strong robustness of fuzzy controller and highly steady precision of PI controller for no-load cutting-in control scheme.
引用
收藏
页码:794 / 798
相关论文
共 50 条
[31]   Vector control and synchronization of doubly fed induction wind generator system [J].
Yuan, GF ;
Chai, JY ;
Li, YD .
IPEMC 2004: THE 4TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2004, :886-890
[32]   Optimal Efficiency Control in a Wind System With Doubly Fed Induction Generator [J].
Karakasis, Nektarios ;
Tsioumas, Evangelos ;
Jabbour, Nikolaos ;
Bazzi, Ali M. ;
Mademlis, Christos .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2019, 34 (01) :356-368
[33]   DC Link Voltage and Power Flow Control of Doubly Fed Induction Generator in Wind Power System [J].
Tuka, Milkias Berhanu .
2020 IEEE PES & IAS POWERAFRICA CONFERENCE, 2020,
[34]   Comparison Between the MIT Rule and Fuzzy Logic Controller to Adapting the Power Generated by a Doubly Fed Induction Generator Integrated in a Wind System [J].
Kendzi, Mohammed ;
Aissaoui, Abdelghani .
2022 10TH INTERNATIONAL CONFERENCE ON SMART GRID, ICSMARTGRID, 2022, :231-235
[35]   Power Control for a Doubly Fed Induction Generator [J].
Boukhriss, Ali ;
Nasser, Tamou ;
Essadki, Ahmed .
PROCEEDINGS OF 2012 INTERNATIONAL CONFERENCE ON COMPLEX SYSTEMS (ICCS12), 2012, :580-584
[36]   Output Power Control of a Wind Energy Conversion System Based on a Doubly Fed Induction Generator [J].
Boulaam, Kaima ;
Boukhelifa, Akkila .
PROCEEDINGS OF 2013 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2013, :292-297
[37]   Power control improvement of doubly fed induction generator based on wind energy conversion system [J].
Rabyi, Kaoutar ;
Mahmoudi, Hassane .
PROCEEDINGS OF 2017 INTERNATIONAL CONFERENCE ON ELECTRICAL AND INFORMATION TECHNOLOGIES (ICEIT 2017), 2017,
[38]   Comparison of PI and Direct Power Control with SVM of Doubly Fed Induction Generator [J].
Belfedal, C. ;
Moreau, S. ;
Champenois, G. ;
Allaoui, T. ;
Denai, M. .
ISTANBUL UNIVERSITY-JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING, 2008, 8 (02) :633-641
[39]   Wind turbine system with Doubly-Fed Induction Generator and rotor power feedback control [J].
Faculty of Electrical Engineering Mechanical Engineering and Naval Architecture, University in Split, Rudjera Boskovica bb, 21000 Split, Croatia .
WSEAS Trans. Syst., 2006, 12 (2860-2867)
[40]   Cutting-in control of the VSCF wind-power generator based on auto-disturbance rejection controller [J].
Institute of Electrical Engineering, Graduate University, Chinese Academy of Sciences, Beijing 100080, China ;
不详 ;
不详 .
Zhongguo Dianji Gongcheng Xuebao, 2006, 3 (13-18)