TPMS-based transpiration cooling for film cooling enhancement

被引:2
|
作者
Broumand, Mohsen [1 ]
Son, Juchan [1 ]
Pyo, Yeongmin [1 ]
Yun, Sean [1 ]
Hong, Zekai [1 ]
机构
[1] Natl Res Council Canada, Aerosp Res Ctr, 1200 Montreal Rd, Ottawa, ON K1A 0R6, Canada
关键词
Gas turbine cooling; Transpiration cooling; Effusion cooling; Pressure sensitive paint; Additive manufacturing; Triply periodic minimal surface (TPMS); HEAT-TRANSFER; GAS; SURFACES; DENSITY; PLATES;
D O I
10.1016/j.ijheatmasstransfer.2024.125824
中图分类号
O414.1 [热力学];
学科分类号
摘要
The present study experimentally evaluates the adiabatic film cooling effectiveness of a gaseous transpiration cooling concept based on a family of nature-inspired triply periodic minimal surface (TPMS) lattices that are enabled by additive manufacturing. The performances of TPMS-based transpiration cooling designs are directly compared to those of a typical effusion cooling design featuring an array of discrete cooling holes, the state-ofthe-art cooling technology for aerospace gas turbines. Specifically, three solid-network TPMS lattice structures with porosities at 30, 40, and 50% are additively manufactured and their adiabatic film cooling effectiveness values are determined using a dual-luminophore pressure sensitive paint (PSP) method based on heat and mass transfer analogy. The experimental results indicate that, as the cooling film grows downstream, the adiabatic film cooling effectiveness of the TPMS lattice structure of 50% porosity approaches 0.77, 0.88, and 0.91 at low, medium, and high coolant flow rates, respectively. The adiabatic film cooling effectiveness values achieved with the TPMS-based transpiration cooling designs of this work reach five times those of conventional effusion cooling under corresponding coolant consumption rates. The findings of the present study suggest that TPMS-based transpiration cooling as a promising alternative to effusion cooling could bring significant efficiency gains to gas turbine engines by reducing cooling air consumptions, since it offers a higher adiabatic film cooling effectiveness, creates a more complete and uniform film coverage, and mitigates the film lift-off propensity at high blowing ratios. Furthermore, the distinctive features of TPMS lattices enable efficient interior cooling, provide high mechanical strengths, and facilitate additive manufacturing.
引用
收藏
页数:12
相关论文
共 50 条
  • [1] EFFECTS OF LATTICE ORIENTATION ANGLE ON TPMS-BASED TRANSPIRATION COOLING
    Son, Juchan
    Broumand, Mohsen
    Pyo, Yeongmin
    Richer, Patrick
    Jodoin, Bertrand
    Hong, Zekai
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 13, 2024,
  • [2] TRANSPIRATION AND FILM COOLING COMBINED WITH EXTERNAL COOLING
    MAYER, E
    DIVOKY, D
    AIAA JOURNAL, 1964, 2 (03) : 578 - 580
  • [3] THE EFFECT OF TRANSPIRATION ON DISCRETE INJECTION FOR FILM COOLING
    Natsui, G.
    Johnson, P. L.
    Torrance, M. C.
    Ricklick, M. A.
    Kapat, J. S.
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, 2012, : 509 - 520
  • [4] TRANSITION FROM TRANSPIRATION TO FILM-COOLING
    ECKERT, ERG
    CHO, HH
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1994, 37 : 3 - 8
  • [5] SURFACE COOLING OF SCRAMJET ENGINE INLETS USING HEAT PIPE, TRANSPIRATION, AND FILM COOLING
    MODLIN, JM
    COLWELL, GT
    JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 1992, 6 (03) : 500 - 504
  • [6] TRANSITION FROM TRANSPIRATION TO FILM-COOLING - COMMENT
    BROUWERS, HJH
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1995, 38 (01) : 183 - 184
  • [7] Conjugate study on heat transfer enhancement of a TPMS-based hybrid heat sink design
    Shen, Jiale
    Zhang, Qiang
    Wang, Zhaoguang
    APPLIED THERMAL ENGINEERING, 2024, 257
  • [8] TRANSPIRATION AND EVAPORATION COOLING
    MARSCHAL.E
    CHEMIE INGENIEUR TECHNIK, 1970, 42 (22) : 1382 - &
  • [9] Transpiration and the cooling of leaves
    Curtis, OF
    AMERICAN JOURNAL OF BOTANY, 1936, 23 (01) : 7 - 10
  • [10] A NOTE ON TRANSPIRATION COOLING
    HYMAN, SC
    JET PROPULSION, 1956, 26 (09): : 780 - 780