RESEARCH ON FRESNEL LINE CONCERNTRATING HEAT COLLECTION SYSTEM BASED ON TRIANGULAR CAvITY RECEIvER

被引：0
|
作者：
Yan Y. [1 ]
Hu Y. [1 ,2 ]
Huang J. [1 ]
Huang Z. [1 ]
Li H. [1 ]
机构：
[1] School of Materials and Energy, Guangdong University of Technology, Guangzhou
[2] Guangdong Provincial Key Laboratory of Fuel Cell Technology, Guangzhou
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2024年 / 45卷 / 02期
关键词：
cavity absorber; collector efficiency; Fresnel lens; solar collector; solar energy;
D O I：
10.19912/j.0254-0096.tynxb.2022-1613
中图分类号：
学科分类号：
摘要：
This article designs a Fresnel line concentrating heat collection system based on a triangular cavity receiver，by building a testing platform，the impact of several factors such as with or without a transparent cover on the cavity，the presence or absence of black paint on the surface of the copper tube inside the cavity，and direct solar irradiance on the outlet temperature of the cavity and the heat collection efficiency of system under actual weather conditions are tested. The research results show that after adding a transparent cover to the smooth copper tube cavity，the heat collection efficiency of system increases from 22.10% to 25.82%. After adding a transparent cover to the black-painted copper tube cavity，the heat collection efficiency of system decreased from 30.40% to 29.50%. After covering the surface of the smooth copper tube with black paint，the system’s heat collection efficiency without a transparent cover in the cavity increases from 21.94% to 34.57%. The heat collection efficiency of the system with a transparent cover in the cavity increased from 25.26% to 29.91%. The direct solar irradiance has a significant impact on the temperature fluctuation at the outlet of the cavity，but its impact on the heat collection efficiency of system is not significant. © 2024 Science Press. All rights reserved.
引用
收藏
页码：23 / 29
页数：6
相关论文
共 14 条
  • [1] XING L J., Rational utilization and development of green energy［J］, Green environmental protection building materials, 3, pp. 50-51, (2021)
  • [2] LIANG S，, Et al., Analysis on an optimal transmittance of Fresnel lens as solar concentrator ［J］, Solar energy, 207, pp. 22-31, (2020)
  • [3] LIU S L., Optimization on a cylindrical Fresnel lens and its validation in a medium-temperature solar steam generation system［J］, Renewable energy, 134, pp. 1332-1343, (2019)
  • [4] WANG R Z，, Et al., Concentrated solar energy applications using Fresnel lenses：a review［J］, Renewable and sustainable energy reviews, 15, 6, pp. 2588-2606, (2011)
  • [5] SHAHI M，, Et al., Progress of experimental studies on compact integrated solar collector-storage retrofits adopting phase change materials［J］, Solar energy, 237, pp. 62-95, (2022)
  • [6] A novel compound elliptical-type concentrator for parabolic primaries with tubular receiver［J］, Solar energy, 134, pp. 383-391, (2016)
  • [7] ZHAI H., Thereotical and experimental investigation of linear concentrating solar collector with cavity absorber ［D］, (2009)
  • [8] NEGI B S, MATHUR S S, KANDPAL T C., Optical and thermal performance evaluation of a linear Fresnel reflector solar concentrator［J］, Solar & wind technology, 6, 5, pp. 589-593, (1989)
  • [9] ABBAS R，, MONTES M J，, PIERA M，, Et al., Solar radiation concentration features in linear fresnel reflector arrays［J］, Energy conversion and management, 54, 1, pp. 133-144, (2012)
  • [10] LIANG H B, FAN M, YOU S J，, Et al., An analysis of the heat loss and overheating protection of a cavity receiver with a novel movable cover for parabolic trough solar collectors［J］, Energy, 158, pp. 719-729, (2018)
12