Numerical simulation of two-dimensional particle flow in broken rockfill materials

被引：0

作者：

Han H.-X. ^{[1
]}

Chen W. ^{[1
]}

Qiu Z.-F. ^{[1
]}

Fu X.-D. ^{[1
]}

机构：

[1] School of Civil and Architectural Engineering, Wuhan University, Wuhan

来源：

Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2016年 / 38卷

关键词：

Numerical simulation; Particle breakage; Particle cluster; Rockfill;

D O I：

10.11779/CJGE2016S2038

中图分类号：

学科分类号：

摘要：

Rockfill materials are easily broken under external force. Based on the single particle crushing mechanism, the indestructible defect is simulated in particle of rockfill materials depending on the generated particles cluster units to overcome rigid circular particle. A broken numerical model for particle of rockfill materials is established by adopting the linear contact model. Indoor plane strain tests are simulated. The internal contact force, micro crack and a variety of energy changes in rockfill materials are analyzed under the loading process. The breakage mechanism for particle of rockfill materials is investigated. The results show that the numerical sample generated by particle clusters can more truly reflect the breakage of particle of rockfill materials through the internal bond strength fracture. The breakage of particle of rockfill materials occurs first in the large particle size and contact force larger particles, then gradually to direction of the maximum pressure, finally shear fracture sliding plane is generated. The number of shear micro crack is greater than that of tensile micro crack throughout the whole loading process, the particle breakage mainly is shear failure, and a lot of particle breakage is produced near the peak point. The total input energy stores in particle cluster in the form of elastic strain energy under small deformation. The elastic strain energy can be converted to other forms of energy dissipation in the form of storage release under large deformation. The research results can provide reference for the study on the deformation of rockfill dams. © 2016, Editorial Office of Chinese Journal of Geotechnical Engineering. All right reserved.

引用

页码：234 / 239

页数：5

共 14 条

[1]

Lade P.V., Yamamuro J.A., Bopp P.A., Significance of particle crushing in granular materials, Journal of Geotechnical Engineering, 122, 4, pp. 309-316, (1996)

[2]

Liu Y., Lu Y.-H., Large-scale simple shear tests of particle breakage of coarse-grained soil, Journal of Ho-hai University (Natural Sciences), 37, 2, pp. 175-178, (2009)

[3]

Hardin B.O., Crushing of soil particle, Journal of Geotechnical Engineering, 111, 10, pp. 1177-1192, (1985)

[4]

Kong X.-J., Liu J.-M., Zou D.-G., Et al., Experimental study of particle breakage of Zipingpu rockfill material, Rock and Soil Mechanics, 35, 1, pp. 35-40, (2014)

[5]

Chen S.-S., Han H.-Q., Fu H., Stress and deformation behaviors of rockfill under cyclic loadings, Chinese Journal of Geotechnical Engineering, 32, 8, pp. 1151-1157, (2010)

[6]

Cheng Y.P., Bolton M.D., Nakata Y., Crushing and plastic deformation of soils simulated using DEM, Geotechnique, 54, 2, pp. 131-141, (2004)

[7]

Shao L., Chi S.-C., Zhang Y., Et al., Study of triaxial shear tests for rockfill based on particle flow code, Rock and Soil Mechanics, 34, 3, pp. 711-720, (2013)

[8]

Ma G., Zhou W., Chang X.-L., Et al., 3D mesoscopic numerical simulation of triaxial shear tests for rockfill, Chinese Journal of Geotechnical Engineering, 33, 5, pp. 746-753, (2011)

[9]

Yang G., Xu J.-B., Liu K.-L., Numerical simulation of particle breakage of coarse aggregates, Rock and Soil Mechanics, 36, 11, pp. 3301-3306, (2015)

[10]

Olivier T.D.V., Jean-Claude C., Numerical model of crushing of grains inside two-dimensional granular materials, Powder Technology, 105, pp. 190-198, (1999)

← 1 2 →