Design and Mechanical Performance Analysis of Two-Stage Flexible Damping System

被引：0
|
作者：
Shi X. [1 ]
Guo Z. [1 ]
Huang Z. [1 ]
Zhou C. [2 ]
Ren Z. [2 ]
机构：
[1] Institute of General Engineering, China Academy of Engineering Physics, Mianyang
[2] School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2024年 / 44卷 / 03期
关键词：
damping efficiency; metal rubber shock absorber; natural frequency; random vibration; secondary flexible vibration isolation;
D O I：
10.16450/j.cnki.issn.1004-6801.2024.03.010
中图分类号：
学科分类号：
摘要：
With regards to the mechanical environment not meeting operational requirements, several steps are taken to address the issue of local amplification of vibrations in individual instruments caused by secondary isolation. Firstly, regarding the metal rubber double-layer isolation system, the flexible stiffness of the mounting plate is fully considered, and a secondary vibration reduction system model with both flexibility and rigidity is established. Secondly, based on the target frequency, the frequency response function of the secondary vibration reduction system is decoupled systematically to solve for the stiffness of the damper. Finite element analysis is then employed for random vibration analysis to validate the feasibility of the theory model of the composite secondary isolation system. Finally, the experimental verification is conducted using a vibration table. The results indicate that when the secondary isolation system meets the engineering stiffness requirements and its first natural frequency is below 40 Hz, the vibration reduction efficiency can reach over 70%. Experimental results are generally consistent with the simulation results. © 2024 Nanjing University of Aeronautics an Astronautics. All rights reserved.
引用
收藏
页码：494 / 501and618
相关论文
共 13 条
  • [1] Honggang LI, PENG Xu, Numerical analysis of shock response of nonlinear two-layer vibration isolation sys⁃tem with stiffness［J］, Noise and Vibration Control, 1, pp. 21-26, (2007)
  • [2] KONG Yanfeng, CHENG Guangtao, ZHANG Zhen-shan, Numerical analysis of shock response of nonlineartwo-layer vibration isolation system with stiffness［J］, Modern Machinery, 3, pp. 22-24, (2010)
  • [3] NIU Haoxuan, YAN Bin, WU Xiao, Design and re⁃ search of a new type vibration isolator for doable-layer vibration isolation system of power unit, Machine Building & Automation, 48, 5, pp. 110-114, (2019)
  • [4] LI Yuchuan, WENG Zeyu, TANG Jie, Et al., Research on vibration isolation effect evaluation of flexible foundation two-layer vibration isolation system, Noise and Vibration Control, 38, 6, pp. 172-177, (2018)
  • [5] LIU Haiping, LUO lie, Study on dynamic characteristics of double layer high damping isolator, Journal of Beijing Institute of Technology, 40, 1, pp. 17-22, (2020)
  • [6] CHEN Gaosheng, LAI Liangqing, JIANG Honggang, Et al., Theoretical modeling and experimental simulation of double layer vibration isolation system [J], Journal of Mechanical Strength, 38, pp. 32-37, (2016)
  • [7] LI Yunyun, ZHOU Xubin, CHEN Weidong, Et al., Study on dynamic characteristics and application limitations of a two-layer vibration isolation system with high static and low dynamic stiffness, Journal of Vibration Engineering, 34, 2, pp. 364-371, (2021)
  • [8] YU Huijie, ZHANG Sheng, Theoretical analysis and vibration isolation performance of double metal rubber isolator, Noise and Vibration Control, 41, 5, pp. 247-250, (2021)
  • [9] CHENG Z, GUI J, ZHAO Y, Et al., Analysis of double-layer vibration isolation characteristics of ship power equipmentf J], Vibroengineering Procedia, 41, pp. 22-27, (2022)
  • [10] DUAN Hongjie, SONG Xueqian, Simple harmonic vibration isolation and parameter optimization of automobile double-layer vibration isolation system, Machinery Design & Manufacture, 3, pp. 21-23, (2007)
12