Preparation, characterization and fatigue performance of anodic oxide film on titanium alloy TC18 in sodium tartrate electrolyte

被引：2

作者：

Liu, Jianhua ^{[1
]}

Yang, Kang ^{[1
]}

Yu, Mei ^{[1
]}

Li, Songmei ^{[1
]}

Wu, Liang ^{[1
]}

Yu, Xiumei ^{[1
]}

机构：

[1] School of Materials Science and Engineering, Beihang University

来源：

Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2014年 / 35卷 / 03期

关键词：

Anodic oxide film; Fatigue; Sodium tartrate; Titanium alloys; Titanium dioxide;

D O I：

10.7527/S1000-6893.2013.0351

中图分类号：

学科分类号：

摘要：

Anodic oxide of titanium alloy TC18 in the film-forming agent of sodium tartrate, a new environmentally friendly electrolyte system without hydrofluoric acid, is investigated and the anodic oxide films are successfully prepared. Morphology and phase structure are studied using scanning electron microscopy and Raman spectrometer. Corrosion resistance of TC18 titanium alloy after anodizing is investigated by adopting electrochemical method. The behaviors of high frequency fatigue are tested on the universal high frequency fatigue testing machine. The results show that films has the surface morphology of ravines and bulge. Amorphous TiO2, anatase phase and rutile phase exist in that films, and brookite phase may also exist in that films. After anodic oxidation, the corrosion resistance of TC18 titanium alloy is significantly improved. Compared to the traditional anodic oxidation in sulfuric acid-phosphoric acid, anodic oxidation in sodium tartrate does not decrease the tensile performance and fatigue performance of TC18 titanium alloy, which means that tensile performance and fatigue performance is well improved.

引用

页码：902 / 910

页数：8

共 30 条

[1]

Dong T.X., Yang C.S., Li F., Et al., Development and actuality of composition analysis for aeronautical metal materials in China, Journal of Materials Engineering, 12, 3, (2002)

[2]

Popa M.V., Vasilescu E., Drob P., Et al., Anodic passivity of some titanium base alloys in aggressive environments, Material Corrosion, 53, 1, pp. 51-55, (2002)

[3]

Roger T., Titanium in the geothermal industry, Geothermics, 32, 4-6, pp. 679-687, (2003)

[4]

Xing Z.K., Tang E.J., Duan R., Et al., Research on structure and properties of micro-arc anodic oxidation film on TC4 titanium alloy, Material Protection, 38, 12, pp. 54-57, (2005)

[5]

Pouilleau J., Devilliers D., Garrido F., Et al., Structure and composition of passive titanium oxide films, Materials Science and Engineering: B, 47, 3, pp. 235-243, (1997)

[6]

Zhai W.J., Zhu B.Q., Liu L.F., Tribo-electrochemical characteristics of Ti-6Al-4V's oxidation film in body fluid, Tribology, 29, 5, pp. 425-431, (2009)

[7]

Che X.H., Fan Z.G., Zhang J.L., Experimental study of preparation of TiO<sub>2</sub> porous films on the surface of TC4 titanium alloy by anodic oxidation, Journal of Materials Engineering, 10, 3, pp. 38-41, (2010)

[8]

Liu M.H., Wen D., Cai J.P., Et al., Study of structure and performance of anti-wear anodizing coating of titanium alloys, Journal of Materials Engineering, 12, pp. 72-79, (2009)

[9]

Cao C.X., Application of titanium alloy on large transporter, Rare Metals Letters, 25, 1, pp. 17-21, (2006)

[10]

Sheng X.F., Ding Z.W., Zhu Y.F., The effects of deformation and heat treatment on the microstructure and properties of Ti-5AI-5Mo-5V-1Cr-1Fe titanium alloys, Acta Metallurgica Sinica, 35, 1, pp. 465-471, (1999)

← 1 2 3 →