Optimization of TIG welding process parameters for X70-304l dissimilar joint using taguchi method

被引：0

作者：

Benlamnouar M.F. ^{[1
,2
]}

Hadji M. ^{[2
]}

Badji R. ^{[1
]}

Bensaid N. ^{[1
]}

Saadi T. ^{[1
]}

Laksir Y.L.D. ^{[1
]}

Senouci S. ^{[3
]}

机构：

[1] Research Center in Industrial Technologies CRTI, Cheraga, 16014, Algiers

[2] Laboratoire des Aeronefs, University of Blida1, Route de Soumaa, Blida

[3] Solids solutions laboratory, physics faculty USTHB, BP 32, El-Alia, Algiers

来源：

Solid State Phenomena | / 51-61期

关键词：

ANOVA; Dissimilar welds; Hardness; Taguchi method; Tensile test;

D O I：

10.4028/www.scientific.net/SSP.297.51

中图分类号：

学科分类号：

摘要：

The optimization of mechanical properties of the welded joints requires a statistical approach such as Taguchi experimental designs associated with experimental techniques and laboratory characterizations. The aim of this work is to propose a method of optimization of the mechanical performances of a TIG dissimilar welding of two grades of steels: a high strength low alloy steel X70 and an austenitic stainless steel 304L. The experimental designs were chosen according to the Taguchi method L9. The metallurgical characterization includes optical microscopy, SEM microscopy, EDX analyses and mechanical tests to establish a relationship between welding parameters, microstructures and mechanical behavior in different dissimilar weld regions. The results showed that the hardness is more strongly related to microstructural evolution than tensile strength of dissimilar joint. It was found that gas flow is the main significant TIG welding parameter affecting dissimilar weld characteristics. © 2019 Trans Tech Publications Ltd, Switzerland.

引用

页码：51 / 61

页数：10

共 20 条

[1]

Kravanja S., Zula T., Cost optimization of industrial steel building structures, Advances in Engineering Software, 41, pp. 442-450, (2010)

[2]

Ouadah M., Touhami O., Ibtiouen R., Benlamnouar M.F., Zergoug M., Corrosive effects of the electromagnetic induction caused by the high voltage power lines on buried X70 steel pipelines, Electrical Power and Energy Systems, 91, pp. 34-41, (2017)

[3]

Bhole S.D., Nemade J.B., Collins L., Cheng L., Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel, Journal of Materials Processing Technology, 173, pp. 92-100, (2006)

[4]

Kumar N.N., Ram G.D.J., Bhattacharya S.S., Et al., Spark Plasma Welding of Austenitic Stainless Steel AISI 304L to Commercially Pure Titanium, Trans Indian Inst Met, Vo, 68, 2015, pp. 289-297

[5]

Lomozik M., Effect of the welding thermal cycles on the structural changes in the heat affected zone and on its properties in joints welded in low alloy steels, Welding International, 14, 11, (2000)

[6]

Bensaid N., Boutagane A., Benlamnouar M.F., Effect of welding process and filler metal on microstructure and mechanical behavior of dissimilar stainless steel welds, International Conference on Rheology and Modeling of Materials (Ic-Rmm2), (2015)

[7]

Ranjbarnodeh E., Serajzadeh S., Kokabi A.H., Fischer A., Effect of welding parameters on residual stresses in dissimilar joint of stainless steel to carbon steel, J Mater Sci, 46, pp. 3225-3232, (2011)

[8]

Wang J., Lu M., Zhang L., Chang W., Xu L., Hu L., Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel, International Journal of Minerals, Metallurgy and Materials, 19, (2012)

[9]

Wang G., Wang H., Xuan F., Et al., Local fracture properties and dissimilar weld integrity in nuclear power plants, Front. Mech. Eng., 8, 3, pp. 283-290, (2013)

[10]

Ragavendran M., Chandrasekhar N., Ravikumar R., Saxena R., Vasudevan M., Bhaduri A.K., Optimization of hybrid laser-TIG welding of 316LN steel using response surface methodology (RSM), Optics and Lasers in Engineering, 94, pp. 27-36, (2017)

← 1 2 →