Temperature performance research of fiber coil in fiber optic gyroscope based on polarization coupling theory

被引：1

作者：

Li X. ^{[1
]}

Zhang C. ^{[1
]}

He Z. ^{[1
]}

Yu Q. ^{[1
]}

机构：

[1] Automation College, Harbin Engineering University, Harbin

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2010年 / 37卷 / 04期

关键词：

Fiber coil; Fiber optic gyroscope; Fiber optics; Polarization cross-coupling; Temperature drift;

D O I：

10.3788/CJL20103704.1053

中图分类号：

学科分类号：

摘要：

In order to study the temperature performance of polarization maintaining fiber coil which is used in middling or high precision fiber optic gyroscope(FOG), the main reasons affecting the performance of fiber coil are analyzed from the viewpoint of the manufacturing process and the temperature changes of external environment. The light wave signal's polarization cross-coupling of the interferometer is qualitative analyzed by using coupled wave idea, and the major polarization errors which affect the performance of FOG are pointed out. According to the transient state of temperature effects of fiber coil, the temperature test system is established to study the signal polarization's changes in fiber coil. Experimental results show that the polarization state of the optical signals is affected by temperature in fiber coil, and also is concerned with temperature distribute of the whole fiber coil. In addition, this system can be used as the performance evaluation system to filter fiber coils with outstanding performance.

引用

页码：1053 / 1057

页数：4

共 17 条

[1]

Zhang G., Yang Q., Study on temperature characteristics of interferometric fiber-optic gyro, Optoelectronic Technology & Information, 14, 1, pp. 17-22, (2001)

[2]

Jia M., Chao D., Zhang C., Thermal analysis and design for fiber optic gyroscope, Journal of Chinese Inertial Technology, 16, 6, pp. 725-729, (2008)

[3]

Wang X., Ma S., Nonlinearity of temperature and scale factor modeling and compensating of FOG, Journal of Beijing University of Aeronautics and Astronautics, 35, 1, pp. 28-31, (2009)

[4]

Ning T., Qin X., Pei L., Et al., A novel way to measure the temperature characteristic of polarization-maintaining fiber, Chinese J. Lasers, 33, 8, pp. 1078-1080, (2006)

[5]

Zhao Y., Liu J., Zhang C., Et al., Fiber optic gyroscope sensing coils and their winding method, Semiconductor Optoelectronics, 23, 5, pp. 312-314, (2002)

[6]

Meng Z., Shao H., Xu H., Et al., Effect caused by coating adhesive on polarization-maintaining fiber coil, Journal of Beijing University of Aeronautics and Astronautics, 32, 5, pp. 958-961, (2006)

[7]

Shupe D.M., Thermally induced nonreciprocity in the fiber-optic interferometer, Appl. Opt., 19, 5, pp. 654-655, (1980)

[8]

Li M., Liu T., Jiang J., Et al., Transient characteristic testing of fiber optic gyro fiber coil based on temperature excitation, Acta Optica Sinica, 28, 3, pp. 435-441, (2008)

[9]

Li Y., Xu H., Zhang C., Study on the thermal-induced nonreciprocity of sensing coil of FOG, Optical Technique, 32, 5, pp. 770-772, (2006)

[10]

Dai X., Yang G., Liu C., The Shupe effect in fiber optic coil and its compensation method, Acta Photonica Sinica, 30, 12, pp. 1470-1473, (2001)

← 1 2 →