Old Tool Materials in a New Dress

被引：0

作者：

Petersen, Hilke ^{[1
]}

Dias, Nelson Filipe Lopes ^{[2
]}

Breidenstein, Bernd ^{[1
]}

Tillmann, Wolfgang ^{[2
]}

机构：

[1] , An der Universität 2, Garbsen

[2] Lehrstuhl für Werkstofftechnologie (LWT), TU Dortmund

来源：

ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb | 2024年 / 119卷 / 7-8期

关键词：

Cutting Materials; Indexing Inserts; Natural Rocks; Thin Films; Tools;

D O I：

10.1515/zwf-2024-1091

中图分类号：

学科分类号：

摘要：

The most important cutting materials for machining are carbides. Tungsten and cobalt are required for their production, but these are becoming increasingly difficult to obtain and sometimes under ethically questionable conditions. Therefore, increasing efforts are being made to expand the range of cutting materials. The basic suitability of natural rocks for cutting tools in less demanding processes has already been demonstrated. The possibility of their PVD coating is discussed below. © 2024 Walter de Gruyter GmbH, Berlin/Boston.

引用

页码：548 / 552

页数：4

共 12 条

[1]

Bobzin R., High-Performance Coatings for Cutting Tools, CIRP Journal of Manufacturing Science and Technology, 18, pp. 1-9, (2017)

[2]

Denkena B., Dittrich M.A., Liu Y., Theuer M., Automatic Regeneration of Cemented Carbide Tools for a Resource Efficient Tool Production, Procedia Manufacturing, 21, pp. 259-265, (2018)

[3]

Young S.B., Responsible Sourcing of Metals: Certification Approaches for Conflict Minerals and Conflict-Free Metals, The International Journal of Life Cycle Assessment, 23, 7, pp. 1429-1447, (2018)

[4]

Rizzo A., Goel S., Grilli M.L., Iglesias R., Jaworska L., Lapkovskis V., Novak P., Postolnyi B.O., Valerini D., The Critical Raw Materials in Cutting Tools for Machining Applications: A Review, Materials, 13, 6, (2020)

[5]

Wolters P., Picker T., Breidenstein B., Krodel A., Denkena B., Behrens B.-A., Et al., WGP-Congress, Dresden, September 2021, pp. 230-238, (2022)

[6]

Denkena B., Breidenstein B., Krodel A., Bergmann B., Picker T., Wolters P., Suitability of Natural Rocks as Materials for Cutting Tools, SN Applied Sciences, 4, (2022)

[7]

Wittke W., Rock Mechanics - Theory and Applications with Case Histories, (1990)

[8]

Breidenstein B., Denkena B., Bergmann B., Wolters P., Picker T., Turning Copper and Aluminum Alloys with Natural Rocks as Cutting Tools, Materials, 15, (2022)

[9]

Breidenstein B., Denkena B., Bergmann B., Picker T., Wolters P., Tool Wear when Using Natural Rocks as Cutting Material for the Turning of Aluminum Alloys and Plastics, Production Engineering, 17, 2, pp. 425-435, (2023)

[10]

Breidenstein B., Denkena B., Wolters P., Keitel M., Tillmann W., Stangier D., Lopes Dias N.F., A Novel Development of Sustainable Cutting Inserts Based on PVD-coated Natural Rocks, Materials Today Sustainability, 24, (2023)

← 1 2 →