Enhancement of electrochemical surface properties in steel substrates using plasma-sprayed coatings

被引：1
作者：
Anderson A. [1 ]
机构：
[1] Department of Mechanical Engineering, Sathyabama University, Chennai
来源：
Anderson, A. (chrisson100@gmail.com) | 1600年 / Taylor and Francis Ltd.卷 / 38期
关键词：
atmospheric plasma spray; electrochemical properties; impedance spectroscopy;
D O I：
10.1080/01430750.2015.1048899
中图分类号：
学科分类号：
摘要：
Ceramic coatings are applied on various engineering hardware components to provide protection against wear, corrosion and high heat fluxes. Metal hardware operating in harsh environments could fail prematurely due to wear, corrosion and high temperature exposure. A protective layer of coating is typically applied to provide a barrier which prolongs component durability and the desired properties of the hardware components. Improvement of corrosion properties on stainless steel surfaces coated with partially stabilised zirconia and zirconia ceria deposited by plasma spraying has been studied in this work. The coated specimens were studied in terms of Tafel polarisation curves and electrochemical impedance spectroscopy. The best behavior was obtained by the zirconia ceria powder coating, showing the maximum corrosion resistance (polarisation resistance of 335.0 KΩ, and corrosion rate of 0.002 mm/y). Those results indicated an improvement of anticorrosive properties, compared to the zirconia ceria system with partially stabilised zirconia. © 2015 Taylor & Francis.
引用
收藏
页码：108 / 110
页数：2
相关论文
共 6 条
  • [1] Hamdan A., Sayuti M., Sarhan A.A.D., Hamdi M., Investigate the Machining Performance of AISI304 Stainless Steel using Thin Pulse Jet and Fluid Atomizer Minimal Quantity Lubrication Systems, International Conference on Machine Learning, Electrical and Mechanical Engineering, pp. 81-86, (2014)
  • [2] Lee K.N., Current Status of Environmental Barrier Coatings for Si-Based Ceramics, Surface and Coatings Technology, 133-134, pp. 1-7, (2000)
  • [3] Loto R.T., Pitting Corrosion Evaluation of Austenitic Stainless Steel Type 304 in Acid Chloride Media, Journal of Materials and Environmental Science, 4, 4, pp. 448-459, (2009)
  • [4] Luciano N.B., Alberto S.C.J., Carlos P.O.J., Manuel R.A.J., Development of an Ultrasonic Thickness Measurement Equipment Prototype, CONIELECOMP, pp. 124-129, (2010)
  • [5] Nava D., Davalos C.E., Martinez-Hernandez A., Manriquez F., Meas Y., Ortega-Borges R., Perez-Bueno J.J., Trejo G., Effects of Heat Treatment on the Tribological and Corrosion Properties of Electrodeposited Ni-P Alloys, International Journal of Electrochemical Science, 8, pp. 2670-2681, (2013)
  • [6] Rojas J.R., Cruchaga M.A., Celentan D.J., Ganaoui M.E., Pateyron B., Numerical Simulation of the Melting of Particles Injected in a Plasma Jet, Ingeniare. Revista chilena de ingeniería, 17, 3, pp. 299-308, (2009)
1