Evaluation method of defect and fracture reason for composite insulator

被引：15
作者：
Zhang, Fuzeng [1 ]
Song, Lei [2 ]
Li, Ruihai [1 ]
Wang, Guoli [1 ]
机构：
[1] Electric Power Research Institute, CSG
[2] China State Key Laboratory of Power System, Department of Electrical Engineering, Tsinghua University
来源：
Gaodianya Jishu/High Voltage Engineering | 2012年 / 38卷 / 11期
关键词：
Adhesion performance; Anatomy experiment of the insulator; Composite insulator; Defect detection; Evaluation method; Fracture;
D O I：
10.3969/j.issn.1003-6520.2012.11.044
中图分类号：
学科分类号：
摘要：
In order to analyze the reason of the fracture of a composite insulator in service in China Southern Grid, we investigated the appearance inspection, material test and anatomy of the AC 500 kV line fracture composite insulator. The results show that the fracture is caused by long-term partial discharge between the core rod and housing, making the core rod serious aging, while the poor adhesion of the interface between the core rod and housing is the main reason for partial discharging. The eclipse hole appears on sheath surfaces under the action of long-term partial discharge. The aging of the core rod is intensified after the moisture enters, leading to the fracture of the core rod .For evaluating the adhesion between the rod and housing, a new five-class evaluation method was proposed. Using this evaluation method, six insulators in service were grading evaluated. Through the classification evaluation, it is known that there are two factors to affect the adhesion between the rod and housing of composite insulators: the adhesion quality of composite insulators during the manufacturing process and long-term high field strength.
引用
收藏
页码：3093 / 3100
页数：7
相关论文
共 27 条
  • [1] Fu B., Various factors affecting anti-pollution design for HVDC transmission line, High Voltage Engineering, 21, 4, pp. 55-58, (1995)
  • [2] Sundararajan R., Gorur R.S., Effect of insulator profiles on DC flashover voltage under polluted conditions, IEEE Transactions on Electrical Insulation, 1, 1, pp. 124-132, (1994)
  • [3] Jiang X., Yuan J., Sun C., Et al., External insulation of ±800 kV UHV DC power transmission lines in China, Power System Technology, 30, 9, pp. 1-9, (2006)
  • [4] Zhang R., Wu G., Yuan T., Et al., Development history and direction of composite insulators on important manufacture technique, High Voltage Engineering, 33, 1, pp. 106-110, (2007)
  • [5] Liu Z., Present situation and prospects of applying composite insulators to UHF transmission lines in China, Power System Technology, 30, 12, pp. 1-7, (2006)
  • [6] Su Z., Fan J., Research on reliability of composite insulators used in EHV and UHV transmission lines, Power System Technology, 30, 12, pp. 16-23, (2006)
  • [7] Li Z., Study on the Long-term performance of silicone rubber polymeric insulators used for polluted areas, (2006)
  • [8] Worldwide service experience with HV composite insulators, 191, pp. 27-43, (2000)
  • [9] Snobar A.A., Jalgif A.A., Silicon rubber insulators performance evaluation in jordanian national grid, Proceeding of 2006 CIGRE Session, (2006)
  • [10] Su Z., Liu Y., Comparison of natural contaminants accumulated on surfaces of suspension and post insulators with DC and AC stress in northern China's inland areas, Power System Technology, 28, 10, pp. 13-17, (2004)
123